B4 my laser crapped out, I was cutting 1/4 bluecor (fan-fold foam) at 60 ipm at something between 20-40 watts Co2 flowing gas laser.
Type: Posts; User: sntlewis
B4 my laser crapped out, I was cutting 1/4 bluecor (fan-fold foam) at 60 ipm at something between 20-40 watts Co2 flowing gas laser.
closer to joy... AC servos are somewhat tuned. I get 200 in/min and 30 in/sec^2 acceleration.
Back to calibrating laser power/machine speed issues.
I have cut (though not real nicely) up to...
Get ready for an education and $$$....
Basically, lasers are "moved" similar to plasma cutters, so think plasma table (which ever size you want, mine has 2'x4' cutting area).
Next, consider...
IMHO(and little experience), the 75/25 doesn't change much in the quality of cut nor the color.
+Stan
First, this may be bad form to ask this here......
But here goes anyway.
I have a few guys that want me to cut parts for them (mainly wood) and I want to be extremely fair about this.
So...
I'm redesigning the cutting nozzle to be a bit more "elegant" than the simple pinhole design.
The use of papermask is intriguing...
Yet, now a question remains concerning burning....
Charred...
Ok, I'm an official lurker as I wanted to make sure I could do what I thought I could do...
I have a laser table with 2'x4' capacity, vacuum table, ac servo drives, and a flowing CO2 laser..
...