504,156 active members
5,353 visitors online
Register for free
Login

Search:

Type: Posts; User: MetalDawg

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Replies
    5
    Views
    982

    Re: ATP calibration Haas ST10

    Awesome! Thank you Steve. My email is bigdawg@metaldawg.com
  2. Replies
    5
    Views
    982

    Re: ATP calibration Haas ST10

    I have an ST15 with the same problem. Do you still have the correct instructions that you were given? Haas still hasn't gotten back with me. Thank you!
  3. Re: What is the proper way to align a BOT tool holder to the spindle?

    Solved:
    https://www.haascnc.com/service/trou...orrection.html
  4. Re: What is the proper way to align a BOT tool holder to the spindle?

    The tool holder is square to the spindle. Haas has a method for that.
    My question is where is the best place on the ID of the BOT holder to do the coaxial measurement.

    The BOT holder can be...
  5. What is the proper way to align a BOT tool holder to the spindle?

    Solved:
    https://www.haascnc.com/service/troubleshooting-and-how-to/how-to/st---ds---toolholders-to-the-spindle-centerline---correction.html

    I have a new ST15 which is a huge upgrade from my last...
  6. Replies
    60
    Views
    4,093

    Re: Tormach customer service

    My point being Jeff (I suppose you had to read between the lines) is that people are more willing to help (even on minor issues) if you make yourself more personable. This is true for every...
  7. Replies
    60
    Views
    4,093

    Re: Tormach customer service

    I had major issues with my first machine, and Tormach went above and beyond the call of duty to rectify the situation for me, and it took a very long time to finally resolve. I believe that their...
  8. Re: How to reconfigure Pathpilot from PCNC 440 to PCNC 770?

    Never mind... I just had a Duh moment. Reload disk....


    Also found out you have to type into the MDI line ADMIN CONFIG and hit enter with the CD in the tray. It will not reload the software by...
  9. How to reconfigure Pathpilot from PCNC 440 to PCNC 770?

    I just received my new 770, and the 440 is going to a new home. The controller can not operate the 770 because the software is configured as a 440 controller. I updated the software thinking it...
  10. Re: TTS ER-20's are killing my collets! Anyone see this before? Know what's happening

    That is crazy! I have been using TTS since March, and have had no issues at all. I am using the same fixture for tightening as well. As far as how much I tighten them down I would guess about 20-...
  11. Replies
    6
    Views
    748

    Re: TRUMP'S 35% TARIFF

    I think at first it will sting, like an antibiotic shot. In the long run, I believe it will jump start entrepreneurs building these machines in the USA once again. Typically, that means a...
  12. Re: WARNING - PathPilot Upgrade Issue - Sudden Spindle Engagement

    I completely agree, and they have been bending over backwards to find a solution!
  13. Re: WARNING - PathPilot Upgrade Issue - Sudden Spindle Engagement

    I agree Dennis. The machines aren't ready. On the plus side I am impressed with the people at Tormach, and how they have worked with me on this issue. If you want please email me at...
  14. Re: WARNING - PathPilot Upgrade Issue - Sudden Spindle Engagement

    Right after I got my 440 my machine stopped working as well. They replaced the Leadshine, and they replaced the power supply as well. Since then I have replaced the 6A fuse several times (the...
  15. Re: WARNING - PathPilot Upgrade Issue - Sudden Spindle Engagement

    To be honest I just assumed it wasn't working because the LED on the screen didn't light up. In retrospect there isn't a door safety switch LED on the PathPilot screen. I have never actually tried...
  16. Re: WARNING - PathPilot Upgrade Issue - Sudden Spindle Engagement

    "I checked my 1100 in both Rapidturn mode and mill mode, and the spindle did not come on uncommanded with the wifi adapter connected to my network. I do not have Dropbox on the controller."

    This...
  17. Re: WARNING - PathPilot Upgrade Issue - Sudden Spindle Engagement

    Coffeetek, Tormach is all over it. They have been working with me diligently for over a month. They have even written special software so that we can decode what is going on. We have spent...
  18. Re: WARNING - PathPilot Upgrade Issue - Sudden Spindle Engagement

    I do not think it is affecting anyone but me. I really think I got a lemon. I have had to replace parts on the machine, and now I need to trouble shoot my door safety switch! From what I hear no...
  19. Re: WARNING - PathPilot Upgrade Issue - Sudden Spindle Engagement

    I thought I would post an update. Tormach sent me a new WiFi adapter, and the problem continued. Tormach then sent me a new computer, and even with the new computer the spindle still engages on its...
  20. Re: WARNING - PathPilot Upgrade Issue - Sudden Spindle Engagement

    That is what Tormach thought as well. They are sending me a new WiFi adapter on Monday, and I will send the one I have now back for testing. It hasn't happened since I took the WiFi out this AM.
  21. Re: WARNING - PathPilot Upgrade Issue - Sudden Spindle Engagement

    I wonder if it might be a 440 issue due to different internals?
  22. WARNING - PathPilot Upgrade Issue - Sudden Spindle Engagement

    Yesterday I upgraded the PathPilot software to v1.9.5 on my new 440. I also installed the supported Dropbox at the same time.

    With the Tormach Wireless Network Adapter installed the PathPilot...
  23. Replies
    2
    Views
    135

    SOLVED: Re: Tormach Post Processor Failing to Post

    Hey, I really appreciate the help, and that was exactly it! I had selected "Air" since I was going to use the Fog Buster to simply blow air vice coolant. I went back into the tool library and...
  24. Replies
    2
    Views
    135

    Tormach Post Processor Failing to Post

    I recently received a Tormach 440, and I am having a difficult time post processing through the latest version of Fusion 360 on a Mac machine running the latest version of OS X. The post processor...
  25. Replies
    10
    Views
    2,405

    Re: plasma cam in the works .

    Do you have the dxf for this table?
Results 1 to 25 of 29
Page 1 of 2 1 2