I've been using the reprap.cps on my Mk3/4 with TNG for 5 years with no issues.
Sent from my SM-S908U1 using Tapatalk
Type: Posts; User: schesby
I've been using the reprap.cps on my Mk3/4 with TNG for 5 years with no issues.
Sent from my SM-S908U1 using Tapatalk
Do you manufacture ER20 collets? If so, I would like to request a sample. I seem to have problems with the accuracy of the Amazon ones. In particular, I seem to go through a lot of 1/8" (0.125")...
I've followed all through step 4. I did try to set up the fixed tool sensor but must have missed something. The tool plunged too deep when I tried to measure. I will try again tonight.
The work...
After having issues with tool crashing into part, I decided to install limit switches to be able to set home as well as a fixed tool height sensor.
I went through all the various steps to configure...
As it urns out, this was the problem. After moving the spindle to a safe height, I reset the machine coordinates. I then ran the program again after setting the work piece height to zero at 1" above...
I do set the top of the workpiece as z-zero.
Here's the first bit of gcode. Not sure where the helix down starts. Gcode is still confusing to me!
%
(1001)
(T3 D=0.5 CR=0.25 - ZMIN=-0.534 - ball...
Using TNG.
I set the xyz axis to zero.
When I start the run, the cutter dives deeply into the part and moves to the helix location, moves back up and starts it's correct movement. Needless to say,...
I've been using Ultimaker Cura as my slicer software since I built my printer about a year and a half ago. For the price (free!), I can't complain.
Sent from my SM-G975U using Tapatalk
Hi, I am in the early stages of trying to get my DIY mill working correctly after having to "upgrade" to TNG after successfully using CNCUSB Mk1 for the last 6 months. For some reason, the CNCUSB...
Update:
I connected another laptop which I used with CNCUSB initially. The same issue remains. Board problem?
Sent from my SM-G975U using Tapatalk
After using this software for the last 6 months, it suddenly reverted to evaluation version and doesn't accept the registration code.
I've tried restarting the computer, the program, etc. The Mk3...
See this link:
https://planet-cnc.com/how-can-i-update-firmware/
Sent from my SM-G975U using Tapatalk
I wanted to let you know that (crossing my fingers), I believe I have conquered the issue.
After the 4th USB cable (quadruple shielded), wiring in the power filter, replacing all the wiring with...
Each time I try to machine a part, I get numerous halts in the program. If I happen to catch it in time, I can click "start from selected line" and it picks up from where it left off.
However, if I...
Here's some pics of my DIY machine. I used a Coolermaster CPU cooling system. My Huanyang spindle/vfd kit came with a submersible pump which I used until the bucket tipped and spilled onto the floor....
Looks good in Fusion 360 also. Thanks!
Sent from my SM-G975U using Tapatalk
Excellent! Thank you very much, Simon. Happy New Year! S.
I'm thinking of getting a jogging keyboard to use with my newly built DIY cnc router. I would like to 3D print a case for it but I am unable to locate any drawings/dimensions for it. The Planetcnc...