From an engineering perspective, the resin will help with some damping and noise, but won't provide a noticeable difference in deflection if that is what you are going for. As suggested before if...
Type: Posts; User: SnowmanSD
From an engineering perspective, the resin will help with some damping and noise, but won't provide a noticeable difference in deflection if that is what you are going for. As suggested before if...
Tom,
It is working properly now. I knew it was something stupid that I missed. I assumed something completely different regarding channels. I really appreciate you replying on a Saturday.
Tom,
Thanks so much for the quick reply. I think I understand what you are saying. I'll try it out real quick and get back to you.
Sent from my SAMSUNG-SM-G900A using Tapatalk
362770
Here is a picture of my test bed.
362768
Here is a screen shot of the trajectory. I am working with the latest version (4.34i)
All,
I am having a bit of issues trying to get my stepper motors to jog in KmotionCNC. I have a small test set up to get an understanding of everything before I move on to a bigger machine. I...
Jeferson,
Yes and no, I reloaded the software, but it is still extremely slow. I found that when it gets cold in my garage, it processes data faster. I think I have a controller issue. So if you...
Mike,
I've sent you an email, also tried to call you. Let me know if you can help. Thanks again
I am having an issue with the DNC mode on my Arrow 500 with CT control. When I am running a program it will get to a point where the machine will only load about 15 lines, run them, pause, load 15...
Is there someone that can help me with the process of reloading the software on an Arrow 500 with a Control Techniques controller? I will need the files and the instructions. I really appreciate...
Al,
Thanks for the reply. What I need to know is what lug do I connect the generated phase to? Does it go on L1, L2, or L3.
All,
I am new to the CNC world and have purchased a 1994 Arrow 500 with the CT FNC control. I am setting this up in my garage with a CNC rated rotary phase converter. I have looked all over...