A new axis must be enabled in the SIK code of the iTNC control. This is no longer available from Heidenhain. I can help with the final authorization of the axis option. [email protected]
I was...
Type: Posts; User: csg67
A new axis must be enabled in the SIK code of the iTNC control. This is no longer available from Heidenhain. I can help with the final authorization of the axis option. [email protected]
I was...
Heidenhain informed earlier about the discontinuation of the software options of the iTNC 530.
I have the tool that allows me to enable the software options that HEIDENHAIN has already stopped....
Id.:242079-01
successor type Id.:376846-9U
Training program Germany
Training worldwide
Soraluce :)
They were looking for their own way...
Data transfer NC > NC program (FN18: SYSREAD)
The FN18: SYSREAD function is particularly useful for OEM cycles if you wish to have access from the NC program to certain NC data, such as active tool...
Update Information No. 4
Releases
The following versions of the NC software were released:
NC software 340 422-03 (export version 340 423-03) - Release: January 2003
NC software 340 480-03...
The PLC program is primitive and does not handle the pocket table.
The PLC program processes the data. The PLC determines the operation.
This information is not yet public.
Please contact Heidenhain Hotline.
This is a very general error message
Error description 2923
Error message: C3B0 Motor ? does not rotate
Cause of error
- Inverter not ready
- Disturbance on RDY input of the PWM output...
M140 or M148.
MP92:
- Decimal character in program output via V24.
- Selection of first dialog language (German, French, Italian, Spanish, Swedish, Finnish or Dutch) or the second dialogue language (English) As...
The cursor-marked sentence must start with a semicolon.
P = user parameter
https://product.heidenhain.de/JPBC/image/HWP.EN/hlr-system/232686_25_a_02.pdf
https://product.heidenhain.de/JPBC/image/HWP.EN/hlr-system/605133_00_a_02.pdf...
Which axis indicates the error? (8650 I2T value of power module is too high <axis>)
Reduce the MP1510.x parameter to half! (.x=0:axis X, .x=1:axis Y, .x=2:axis Z)
8650 I2T value of power module is too high <axis>
Oscillation occurs. Mechanical problem. Too loose ball screew or bearing.
Beautiful piece!
382286
https://drive.google.com/open?id=1EfSy-B7mDRQYh2C1Jf6gMbSwQQMMzihb
No product or service may be provided in the region
No product or service can be given to the region
https://product.heidenhain.de/JPBC/image/HWP.EN/hlr-system/605043_00_a_02.pdf
Everything support discontinued: 31.12.2014
This was the MEGA-PROMMER:
https://www.mikrocontroller.net/topic/173010#1657928
Other EPROM programmers can also be used. The PLCdesign program requires the compilation of data. To do this, you...
367860
Replace encoder!
Successor: ERN451 500, product ID: 376857-51
https://product.heidenhain.de/JPBC/image/FILEBASE_PUBLIC/284678_00_a_02.pdf
https://product.heidenhain.de/JPBC/image/FILEBASE_PUBLIC/605960_00_a_02.pdf
Z-Measuring system defective A = Signal amplitude error on Z-axis
Z-Measuring system defective B = Signal frequency error on Z-axis
Z-Measuring system defective C = Error with distance-coded scale...
A = Signal amplitude error
B = Signal frequency error
C = Error with distance-coded scale
Possible error causes:
- Encoder not connected
- Cable damaged
- Glass scale contaminated or damaged...
RENATA CR2450N or CR2477N
Heidenhain encoder does not contain batteries.
Buffer battery info: enter the code number 79513