Search:

I make my Button wirh cmd: "File.Settings_...", there is the Problem what i show in the Video.

With expr: "settings();" it works.

Thank You.

Have a look.
https://www.youtube.com/watch?v=oSJWdaTpWkw

Hello. I noticed the following. I don't think it's supposed to be like that.
I have an extra button to access the settings.
This only works if I first e.g. didn't have the tool table open. Or the...

Take the following one:
https://a.aliexpress.com/_Eug9gvD

all scripts out of the box in TNGv2

Bad USB cable.

Pity

Hello, in settings you can set under utilities which counters should be printed in the output. E.g. limit and input. A consecutive number is attached.
But as it is now, it's pretty much useless. It...

Hello, in settings you can set under utilities which counters should be printed in the output. E.g. limit and input. A consecutive number is attached.
But as it is now, it's pretty much useless. It...

So you would have the possibility to e.g. To regulate spindle speed, feed and G0 via potentiometer? Then I would be extremely for it.

what exactly could I do with it.

Every time a limit, input or estop etc. is activated. Is that printed with a counter in the output window.
Unfortunately, this is not really good for troubleshooting. It would make sense if it would...

Every time a limit, input or estop etc. is activated. Is that printed with a counter in the output window.
Unfortunately, this is not really good for troubleshooting. It would make sense if it would...

Every time a limit, input or estop etc. is activated. Is that printed with a counter in the output window.
Unfortunately, this is not really good for troubleshooting. It would make sense if it would...

Thanks. It works.

https://www.cnczone.com/forums/planetcnc/403208-independent-pwm-signal-output-3.html#post2469000

Thanks. I had already tried a few things. I had no idea simply to write the value behind another semicolon.

Can you please break down what the three values stand for?

And how do you...

I think I put myself wrong.
I would like to call up the following values via the toolbar button. As in the example above with a dropdown menu.
M63 P1 Q106
M63 P1 Q112
M63 P1 Q218

I would like...

cmd: "Machine.Output_PWM" image="BtnBottom/laser-beam.svg" imagechange="true" stroke=1.1 type=menu val="[0;0]@PWM1 0%|[0;25]@PWM1 25%|[0;75]@PWM1 75%|[0;100]@PWM1 100%"
Unfortunately that does not...

If I control it via MDI, it works.
so:
M63 P1 Q106

Then the motor turns once per minute. Because the steps on the driver are set to 6400

M63 P1 Q6400 would be 1x per second


I would just...

That doesn't get me anywhere. I want to use the PWM signal of the MK3 / 9 controller.

How can I declare less than 1%?

Hello. Is it possible to connect the PWM output signal directly to a stepper motor driver. So to the Pul / Step input of the driver.

It works. But do I have to switch something in between? I don't...

Since today, when I switch an output, all outputs are always switched. No matter which output pin I switch, they are all activated.

I have had a strange spending behavior since today. no matter...

I've tried both variants. I have now switched to NC and optocoupler. Now it works.

New motor drivers, new problems with the alarm signal / error pin.
Hello.
I have four drivers on my MK3 / 9 controller.
I use the ALM signals. With the old drivers everything was as it should....

This is because of the China plagiarism. The software / controller from Planet-CNC requires a license.

https://planet-cnc.com/product/cnc-usb-controller-license/

The CNC USB controller Mk3DRV (4 axis) come with integrated stepper drivers

As I said, I won't get over your problem. TNGv2 can do exactly what you want, align the portal at a 90 ° angle to the machine bed axis.

https://m.facebook.com/watch/?v=433234400943430&_rdr

I do not understand exactly what you mean.
I do a gantry squaring after turning on the machine. After that it doesn't matter whether I move manually or whether a program is being processed.

What do I have to enter where so that it moves to the position that was measured after measuring.
As it is now, it's totally impractical for me and it destroys my entire workflow.

Is it intended that the machine no longer moves to the measured position after measuring. Unfortunately no documentation on this.