Search:

hy, i shared a programing manual in here, at post 3, for a newer machine, but it should be compatible to some extend : https://www.cnczone.com/forums/okuma/393294-cam.html

are you looking for a...

hy, in order to lower the edit time, next time, replace G03 with G2, and G02 with G3 :)

or even faster, try to output G=variable_a and G=variable_b, and only assign the variables inside the...

hy, check these 2 links, kindly :)

OSP-P300A is our intelligent cnc control // Okuma // Okuma Europe GmbH

www.youtube.com/watch?v=C7_j4-lgmpU&feature=emb_logo

hy ... i have all the manuals in pdf format, arround 20-25manuals/per single cnc

if i wish to search for something, i use an in-file search, going through all in just few seconds

i sync my pc...

hy, if you wish to achieve further independency, then you have to remove the Y axis constrain; pls check video below

maybe is not a must for wood, because blanks are rectangular / kindly :)

...

hy, off course, both can use same code, because required motions are pretty identical; if you use the code with :
... drill+x_offset_0 it will drill
... face_grooving_tool+x_offset_<>_0 it will...

hy mr wizard, maybe he has a live center in it ?! m19 is not so powerfull; if i put an allen key inside a screw inside a jaw, i can diff m19 by 0.2-0.3*, but i diff 110+147 only 0.003*

for such...

hy jphk :)

if you wish, pls check these 2 threads about splines on okuma :
... https://www.cnczone.com/forums/okuma/302486-mastercam.html
... https://www.cnczone.com/forums/okuma/309768-cnc.html...

hy guys :)



just like rcs said, g182 is a boring cycle; uses C axis, and M orientation



it works because g73 = grooving

... you seem to know your kitchen well; good luck :)

hy, notch type is there to assure that the contact is done in both areas : upper and lower; this is a trick to avoid uneven contact, at least theoretical

downside is that using a notch type for...

what others do/think is their business :) this does not mean that i don't respect others, but i avoid thinking for them ... i can't :)

hy bob, i don't have time to read all, but all i can tell is that many shops consider buying another new/used machine, without considering 1st the possibility to increase productivity with less cost...

hi, for probing more than 4 points inside a bore, or, for contact points at angular positions <> 0 90 180 270, it is required a probe ( and software ) that is sensitive to cosine directions, thus can...

hy stevie, this should be normal : a cnc is never moving at a speed greater then the program value, thus real feed <= programed feed

a toolpath is a serie of geometrical entities, and the machine...

hi, you are lucky :) a new machine arround here is leaking big time :) .... about yours, if you wil share a few photos, i may suggest some 'walls'



send him a video / kindly :)

hy mojo :)



yeah, me too ...



so far, i always believed that someone who is building a g-code over 'years' has machining background :) hmm, whatever

hy marioz, i was also thinking about a miss-resolution : for example, original bmp is scaled somewhere, before sending it to the nc, or after, thus during execution ?! depeding on scale algorithm,...

hi, i believe rcaff is on the pizza today : it seems that the laser was still cutting during repositioning. Optimized repositioning should not deliver paralel lines. If possible, verify the...

hy, check geometry/alignment ... if you wish, share a photo with the fixture&tool, and i may suggest a few things / kindly :)

hey teahole, how did you do this ? pleasssssssse .... yes, i realized that this is cool only a few seconds ago :)

can you remap alarm's type ? can you help me with this :...

hy, i am dealing these days with local variables, and i remembered this thread

VS are local variables ( flashed on reset ), array type : for example, VS00001 = 1 and VS1 = 1 will target same...

hy 8laster :) i guess is nice if you have experience with multus & LT's; so far, i have never worked on such machines ...

it seems that he uses G52, like it is shown in his other thread, but i...

no, tom is the only one as good as tom, using youtube like tom does :)

hy :)
... 1 clamp ( faster & expensive ) : y lathe + lolipop endmill
... 2 clamps ( slower & cheaper ) : non y lathe + without endmill + custom fixture / kindly :)