10 thumbs up!!! :banana:
May I ask what your source was?
Thanks Chris
Type: Posts; User: david rendon
10 thumbs up!!! :banana:
May I ask what your source was?
Thanks Chris
Morning,
Anybody knows where I can check the specs for an M75X1.5 6H (minor diameter for a female, etc) ?
thank you so much
:bat:
Good morning.
May I have an e-mail to forward a resume?
Thank you so much!
will do!:rainfro:
The part is already seating on the Datum, so it'll be redundant if I supported the part under the area being machined.
The part came out OK but I was wondering if there are any small...
I wish I could disclose the blue print =(
I'm boring and then thread milling a 1-3/8-16 hole, and the thing is that the part is "L" shaped and is seating on the far side of the feature being...
Hello,
Please share experiences ...
I have a problem with a part I'm holding on a fixture.... The part shatters on me!!
Anybody know of a fixture component for purchase to minimize this...
a lot !!
for instance I want to know how to tap a hole
:violin: no havent =( ..... I decided to learn how to live with out it
:drowning:
Anybody can share an axample of how a tapping canned cycle would look like in a Mori Lathe (MSC-518)
MSC-518
Sorry 4 the delay :D
I'm facing a part that calls out for a .001" flatness .... But right on the center of the part, I'm getting a small protuberance that have already pissed me off !!!!.
somebody please tell me...
Thats exactly where I'm having trouble with ... How can I likn that new post processor? :confused:
Hello,
Would you provide the procedure of how to upload a post processor?
(flame2)
Cool guys!!
:D
This was my first aproach, but for some reason didnt work ...
N7(SPOT DRILL 3/8" X 90 GRDS)
G28U0W0
G54
G0T707
M8
G97S950M3
G0X0.Z.5
Z.2
G1Z-.15F0.001
Hello,
Will somebody share an example on how to call a local subprogram in a Mori Lathe?
thanks
Thanks a lot I will!
Sorry about that ... the control is a fanuc based MSC-518
Hello everybody,
would somebody share an example of a local subprogram call with a Moriseiki CL25 Lathe?
thanks a lot
:violin:
:argue:
Hello everybody,
Does enyone know a link or something to download the programming manual of a Moriseiki CL25 lathe?
Thanks a lot Bro's
There is no switch.
The limit switch I would have to ask my maintenance guy because I'm not sure.
I remember that okuma lathes would turn on a led when chucking by ID and a different led when...
Hi everybody,
I'm confused on why my lathe doesn't let me run a program or even turning the spindle on when chuckin a part by ID.
Anybody??!!
Hello gentleman,
I do not know if this is the correct Forum to post this, I'm gonna do it anyways.
What would be the best way to accurately locate a part by:
1.- Locating the part by its ID...
Sorry for being such a kid that won't stop asking ...
So in other words .... in the G96 SXXXX goes the SFM desired value to mantain?? (in this case G96 S479?)
cool.
How did you get the SFM ?
:banana:
Pretty nice answer!
What values did you input to the formula to get S478?
Is there a formula to calculate the real Speed desired on certain X coordinate when using G96???
Let's suppose I'm facing between Diam 6.0" and 4.5" and want to have a real speed of S305 at 6.0"...
thanks for the info!.
I actually plan this for large runs of parts.
Can this rotary broaches be adapted to an arbor press and used without the rotating action?
I was actually thinking of some sort of die to be set on an arbor press ..... however I never saw anything like that website you just recommended me