We just got out 5 axis fadal 4020 home, it has a 88hs control. We are using multi dnc to send g code. We struggle to get multi dnc to work, but found We had to delete the information that it was...
Type: Posts; User: sledhead306
We just got out 5 axis fadal 4020 home, it has a 88hs control. We are using multi dnc to send g code. We struggle to get multi dnc to work, but found We had to delete the information that it was...
I found it would just stall if I tried to get anything faster by Changing my steps. I tried all the kernnal speed options. What kernnal speed do you recommend
Sent from my SM-G930W8 using...
I get what you are saying. After some research and picking my own brain I think I'm going to order some 570 oz motors and try that. I am doing a y extension at the moment so won't get to find out for...
I believe is it 60vdc but I'd have to get a closer look I think I tagged the kit I bought
Sent from my SM-G930W8 using Tapatalk
I have tried 1/8 1/4 1/2. Still no luck. I am running a bare bones p5k deluxe mother board with a 2.2 ghz amd processor. 4 gb of ram on Windows xp. I have an aftermarket card for the lpt port. Not...
2.2 mh? I'm not familiar with that
Sent from my SM-G930W8 using Tapatalk
Hey I have been fooling with my g0704 that I converted to ball screw and used a cnc kit from...
I have a g0704 in converted to cnc using mach3. I have had good success, I am looking to convert the spindle to a DC DC tread mill motor. I have a couple 6000 rpm motors. any recommendations on what...
so I'm still confused... is it possible to just connect that 0-10v output directly to where the POT would go on a dc motor controller.... I am using the same BOB and have a dc tread mill motor and...
ok wgatfc
I think u have me convinced on buying a g0704. I think I'm going to sell my pdm 30 and use the extra cash towards steppers and things
ok well the general consensus is everyone likes the dovetailed mills. I would like to learn as much as I can from your guys experience. if I were to buy a different one what would be recommended? I...
thank you for all the info. that was my mistake for saying servo instead of stepper. I was planning on using all the nema 34 motors I have a power supply I believe will work but it only goes to 48...
I recently bought a king pdm 30 mill from a guy in town here and am looking to convert it to cnc. I have cnc experience at the shop I work at but I would like to have this unit at home to do small...