Looking for information on how to set the zero position and each pallet position on a RGV Toyoda pallet system with MC1K drives.
Type: Posts; User: powercut
Looking for information on how to set the zero position and each pallet position on a RGV Toyoda pallet system with MC1K drives.
I guess my last response was being sent the same time as yours.
Sounds like you are having quit an adventure, good luck with it.
If your looking for any other equipment, I sell and service CNC...
Hi Anthony,
I do not think you need to reset zero return either, like you said the pallet change position is correct and the distance to zero return is correct when you first power up the machine....
The oil cooler is on prior to second power-up or ready state, you must have oil pressure from the oil cooler in order to close the pressure switch located on the oil cooler. If the pressure switch is...
Red cap motors have a memory. Check on and try the following:
1.Powerup the machine, zero return x, y, and z axis, then check the position display, make sure all position displays read zero, if...
If your getting not ready this means that the second stage of power on has not come on yet, check the following things:
1. Check to see if any axis is in the over travel position or if any of the...
I have a few questions for you:
1. What color is the end of the Axis motors: black, yellow or red?
2. How are you zero returning the machine before and after machining, is it by MDI or manually...
I stock a lot of Used Fanuc and Yasakawa (Yasnac) parts as well as mechanical parts for CNC machinery. It sounds like you found the drive you were looking for but if you need any other CNC drives or...
Does anyone know if you can use a Fuji Frenic 5000V2 spindle drive in place of a 5000M2?