Thank you Mactec54 Much appreciated.
Type: Posts; User: WillyInAus
Thank you Mactec54 Much appreciated.
Thanks, Mactec much appreciated I will change it is there anything else that would pose an issue in your mind :-)
I have set PN 01 to 24000 as from what I am gathering that relates rpm?
Not sure what going on but now I have to different accounts on CNCZone the one on my Laptop is Austra on my laptop wouldn't let me recover my password, but my workshop PC still has the old password...
Windows 10 is so new I wouldn't go with it.
I run Mach3 on a XP machine and will just leave it as it is, and will be moving over to Linux CNC very soon duel boot.
Just turn the Nags off on your...
Hey country one thing I will chime in and say is do you have the capabilities to get a full sheet on the table if that is what the aim is.
I built my machine for a half sheet for the above reasons....
Ok so have most of everything moving had a few issues with a wire in a steeper that was causing me on and off issues and setting up the THC seem to have got that sorted it moves up an down test mode...
Holy crap I understand your pain, I really need to do a tip run lol i have too much **** taking at room that's just junk.
Nice work on the torch body Rod, head down bum up.
You do realise we are having a race to the finish lien don't you ;-)
I am having problems getting motivated lately.
I aint blowing anyone lol.
Rod is a legend helped me build my first CNC router mentored me all the way through from start to finish I think that was about 8 years ago?
you will see start to see more info starting next week...
Brisbane as for the Hypertherm i just went with something I don't have to worry about they are not cheap though I will watching on with interest with rodw build and his plasma as well.
As for EMI...
Is this first post actually correct to me it looks the wrong way around?
Pins 3 & 4 Are on and off in the Hypertherm manual
Pins 5 & 6 are the voltage divider in the Hypertherm manual
I don't...
Hey Rod I actually use RS Components for most of the stuff I buy, found them to be cheaper and free deliver if I order before 5pm I have it the following morning.
Jaycar just never seems to have...
Yep sorry about that was having a moment lol and it was a little rude.
Well I ended up ordering a G540 yesterday for some reason I couldn't get the z axis going on one of the Chinese drivers maybe faulty but had enough of stuffing around as I want to get moving I have...
Thats all that matters Muza as long as your happy and its works, over the years I have built three machines two CNC roouters and a X3 mill the best was a bit of this and a bit of that but I was...
Hi Muza thanks for that, after a test today I can easily archive the 10m a min on the X axis I may require actually it was running at 12m, so will trim it down to about 7m a min to start with
but...
Thanks Muza very much appreciated it always helps to see someone else's machine, thanks for the detailed photos.
That paper where di d you get it from if you don't mind me asking I really need...
Hi Muza, would love a photo if you have a chance seems like our builds wont be that different lol
50x50 SHS as well as 50x75 RHS Frame
SBR Linear Rails
Proma THC bit of a shame could have...
Hi guys, over the years I have built two CNC routers with help of some good people like Rodm etc but now its time to get serious and build a plasma table cut area of 1.2mx1.2m
and have given myself...
Mate your right we still love port but working conditions are crap as you would be aware.
We will probably come back and retire actually we are aware of two people that have done the same moved to...
Well I was but I am back in Brisbane lol bit of a bugger six months ago and you could have seen one in the flesh.
Why not outsource it?
You could try Reddotmachinery in Aus they sell the Chinese units, search for them on google at least you would have local support well I would hope, I haven't purchased...
Yep its a dongle I have one as well but I also have other software that requires a dongles so its just not the Chinese that use them.
so load software with dongle in if its not picking up the...
Well I got my tube from Shirley at ColeTech it was packed and labelled well.
I was worried after I had seen the problems bdring had but shirley assured me that they had very few breakages I took...
Hi just read your post I have been doing some reading on this same controller as I have one on the way anyway not sure if you have seen this may be of some help.
...
I should really fix that up lol been busy with life and stuff.
Hey Claudio and brisbane lads the wife and I are heading back to Brisbane so I will be able to attend all going well.
Willy
Can I ask why you even bothered posting though (pidsq off) lol I couldn't honestly care what you think but I feel happy that my problem hasn't just pissed me off but you as well :rainfro:. why even...
Well guys thought I just jump in and say my spindle has just failed as well not sure why, its one the of the ones from Kelling spent bucket load on it probably only done 200hours all up the spindle...