I have an earth bar but I've mounted it in the box itself should I move it? My box also has enough room to run raceway around this panel is that ok to do or should I have everything on the removable...
Type: Posts; User: anathema
I have an earth bar but I've mounted it in the box itself should I move it? My box also has enough room to run raceway around this panel is that ok to do or should I have everything on the removable...
Hi, I'm planning out my control panel for a Masso 4 axis. I'm layingout the control panel in photoshop to plan the best way to wire it all together. I've not included raceways but plan to add them....
Yes, the ball screws on all axis are setup the same. Cheapest possible BK12 on the motor side, the ball nut connected to its axis plate for movement and\ the opposing side of the screw is floating. ...
If you're planning to buy an Obscidian CNC machine please read this first.
I usually don't write reviews, and I expect nothing to come of it, but I do want people to be educated on what Obscidian...
Hello, I have a Heidenhain ND1102 and want to use the Heidenhain ST1288 length gage with it. The 1288 is 1Vpp. I connect the ST1288 to the back of the ND1100 and open the encoder setup The types...
I just went through this exact same scenario. I end up with a Jet CS18 drill stand. It fits the 440 perfectly. It has a shallow chip tray with drain and a decent sized cabinet underneath. It was...
So you have to vacuum the chips from the tray itself? They dont go into a basket like the other machines?
Hi a followup question. When looking at the 440 chip tray how does it drain coolant and separate chips? on my 770 the entire center of the chip try is removed so that the chip and coolant fall into a...
Wow thanks. I just downloaded the .step for the 440 and it's much smaller than I thought it was. My stand will definitely work. This is like getting a free power draw bar.
Hi, I'm thinking of purchasing a 440 but feel like their $1000 cabinet might be a little overpriced. Can anyone tell me the measurements for the mounting points for the 440 mill and chip pan? I have...