X, Y, Z, PLUS rotary
Type: Posts; User: Slackdaddy
X, Y, Z, PLUS rotary
I had planned on something similar, The sides would "frames" made of roughly 2" x 3" x 1/4" tube. So they could be welded up higher to avoid chips.
Question:
Is there continuously supported round rail, that the mounting leg of the rail is stout enough to only contact the frame metal at the fastener locations (every 3-6" ??)
I ask this, because...
I have access to an engine machine shop,, the mill that they "deck" a head, and a mill they deck a block could be used to mill OUTSIDE surfaces.
I have a pretty full metal shop at home (cold saws,...
I did search the trems Meshcam and 4th,, only thing I found was a vauge discussion about 4th axis support being dropped in one of the upgrades??
The GRZ site did not give any clues.
Anyone know...
Craig,
Thank you for your response.
I had thought about having the metal frame "decked" (milled) at a local machine shop after welding, IF I were going to mount a "track rail" to it.
My concern...
I am back on my design phase of making a CNC router that will be a dedicated gun stock router.(hobby grade).
I have access to a full metal shop so I was going to build a heavy/rigid metal frame....
Just took a quick look at MOI,, did not realize it was made by the designer of Rhino CAD,,
I looks very promising,,
Thanks
We are finalizing a design /build of a 4 axis router built specifically to route out gun stocks from laminated blanks. That is all this machine will do, typ turn out "one of" custom carved stocks.
...
Once again, Thanks for all your help.
I will post up when this gets going,, probobly 6 months out.
Slack
Gerry,
Thanks for the reply.
Yes, in the relm of things a gun stock is not a large amount of carving, And while I do not want to fall asleep carving a stock, I do not have to squeeze the last 10%...
Marv,
Thanks for your response. The "plywood" is Spectra-ply, it is 1/16" dyed plys, but they do not spec the resin used. https://www.cwp-usa.com/collections/spectraply-panel-10x35?page=1
*8HP?...
Working on specs for this machine, specifically rough routing plywood that is made with 1/16 colored birch layups, the blanks would be roughly 2" thick.
Before I can think about X, Y, and Z speeds...
Gerry,
Thank you for the response, 90% of what I use would be laminated plywood.
What is odd is both videos are from the same machine supplier,, unsure of why they used different techniques.
I...
Thank you for your in depth response.
The inlay would be a separate operation, most likely with a bit change to an end mill bit.
I will look into Deskproto and the associated literature.
Hobbyist level, I have built 3D printers and refurbished an old Epilog Laser, Now I am looking at building a task specific 4 axis router for gun stocks.
I have seen what appears to be 2 distinct...