Hi all,
is the Plugin (v12, v14?) working with the latest UCCNC for everybody else?
Kind regards,
Robert
Type: Posts; User: -Robert-
Hi all,
is the Plugin (v12, v14?) working with the latest UCCNC for everybody else?
Kind regards,
Robert
Hi Dan (and all),
I got some further insights. Sending "01 03 01 08 F1 8E" (stop) at 9600 8N1 through a terminal program results in the VFD to return "01 03 01 00 F0 48", so I guess the...
Hi Dan,
thanks for helping me.
I am using (and to make sure, replaced again) the plugin with the version from forum.cncdrive.com • View topic - Huanyang Plugin.
UCCNC
Software version:...
Hi all,
I used the hyplugin12 and got both the actual rpm as well as the actual current (and of course was able to control the speed). After updating to the latest version of UCCNC and hyplugin14,...
Is this a statement or a question?
Sometimes I assume that in fact other people do something by intend. In this case, I would assume that the "G53" is perfectly right under the assumption that my...
Hi!
I am new to CNC, so maybe I have some misunderstanding.
My CNC mill is setup with Z-Axis counting upwards, Z-endstop mounted so home-position is UP and is at 0(mm). Soft-limits are set to...
I finally followed the standard way by using Dan911s Plugin (thanks for that!) and an ADM2687 isolated RS485 (which I do not feed using the internal DC-DC coupler but the Huanyangs own "5V"). Works...
So when I now start toggling some outputs and do some sleeping (for timing) afterwards I am not slowing down the UCCNC core?
Maybe there is some misunderstanding. RS485 towards the spindle/vfd...
Hi!
I operate a UC300ETH together with UCCNC and a Huanyang VFD. I am aware of the macro for using a USB-RS485 converter for connecting PC (UCCNC) -> RS485-Converter -> VFD.
Although having...