Here it is if anyone needs it
https://www.cnczone.com/forums/attachment.php?attachmentid=503222&stc=1
Type: Posts; User: dave73
Here it is if anyone needs it
https://www.cnczone.com/forums/attachment.php?attachmentid=503222&stc=1
Has anyone got the drawing for the Hurco part "Bushing Nylon Splined 713-0016-058", it fits on the Variable Drive spindle, there are two of them
I am presuming you cant buy them from Hurco, unless...
Next, while holding the brake on, using a socket undo the nut holding the tension spring on.
Obviously, undo while keeping the pressure on
Anybody done a variable speed belt change, and, bearing change on a Hurco KM3 head.
I will put pictures up as I do it.
Thanks
First thing I did was to remove main motor at back of ram!...
Anybody done a variable speed belt change, and, bearing change on a Hurco KM3 head.
I will put pictures up as I do it.
Thanks
First thing I did was to remove main motor at back of ram!...
I need a post processor ?
What is the cam system? You need the post processor for!
Also if you are doing 2D the conversational control is faster
Regards
Hi, don’t know if you got your problem sorted, but you can’t add any memory, also I think you can download from floppy and the RS232 ports on the back if you have them, it can also depend on you...
Hi, any body out there got a Gibbs software for Sale, preferably Version 9.5/7 with single user dongle, thankyou Dave
This is a very good point Sunny Bank, but, any Machine Control Programmer who can use a Fanuc or Heidenhain control can use a Hurco. Difference between Hurco controls and majority of others, speed of...
For quick no hassle programming, buy a Hurco. The control is easy and flexible, quality of machine build no different to Bridgport/Hardinge, the Hurco probably has more grunt as they were initially...
Hi, where in the world are you.