You don't unless you have Multi-Cut (an optional module that's included with 4 axis & higher). It has the option of doing multiple depths in a single operation. With the normal 3 axis planar there's...
Type: Posts; User: bnagel
You don't unless you have Multi-Cut (an optional module that's included with 4 axis & higher). It has the option of doing multiple depths in a single operation. With the normal 3 axis planar there's...
Not pencil cut - just Cut -
There is not a 3D chamfer operation. Either do a 3axis Cut with a ball end mill or do a 3axis Project of a 2axis path. I would need a file to look at to advise further.
look for the following in your post,,
MinArc .0099 # MinArc Default = .0099
MinRad .005 # MinRad Default = .005
set them to .001...
Try doing a Wave link from the model and hide the original, this will allow you to select keypoints and apply Synchronous operations. Or, it could be the geometry came in as non-solid. See link for a...
Right-click the operation and choose regenerate with original.
I'm assuming you did a right-click & edit parameters. This will only allow you to edit non-motion records like speed, feed, tool...
Try changing the setup sheet style to classic - this is text only output - should confirm if it's an issue with your internet browser.
Tools>Options>Files>Setup Sheet
here's a parasolid and Step
342460342462
Length?
DB9 female to DB25 male?
Jumpers required?
What's the control?
Do you know the level of software you have? Waveform is included in Standard milling or higher. It is not in Essential milling.
Check out setting 143 'Machine Data Collect'
Using the serial port you send a 'Q' command and the machine will reply the results in CSV format.
example:
Q100 Machine Serial Number
Q101...