I'm working on an MV-40 with a MF-M4 control. I was initially getting a spindle cooling unit error and while I worked on that I had the machine off. When I powered the machine up I had a fuse break...
Type: Posts; User: nburgey
I'm working on an MV-40 with a MF-M4 control. I was initially getting a spindle cooling unit error and while I worked on that I had the machine off. When I powered the machine up I had a fuse break...
thanks. I actually have a SS high pressure nipple ordered and supposed to arrive any minute. it is rated at 2400 psi so if that doesn't fix it I will try a piece of hydraulic hose and will also make...
it is actually a 800MM Horizontal Machine Center. I attached a parts drawing of the thru spindle piping. Item 25(32) is the fitting that is breaking.
we do have a lot of vibration on the part that is running. I am not sure what kind of flexible fitting I could use. There is also a "T" that has an air blow and check valve for the air blow attached...
My company just bought a used Okuma MB8000-H. The machine came in pretty bad shape but overall runs well. After about a week of running, the High Pressure Coolant Fitting that attaches to the back of...
I was able to fix the issue by adjusting the spindle drive. I was at first only making small adjustments thinking it was going to be touchy but it turns the timing was so far off I had to make a...
I am working on a Mori Seiki MC-1624 with a Fanuc control O-M and a 6059 spindle drive.
My issue is the timing on the M3 and the M4. I have been trying to adjust the timing on the spindle drive...
the spindle drive was bad. we ended up trading our machine in since a new drive is $14,000 and a rebuilt drive is $4,000. machine isn't worth the money we put into it.
I am working on a MV-40B and the X-axis is .393 off. I have already done re-reference on the X with no luck. I then did a grid shift and it didn't make a difference. Any clue what this could be?
the Alarm is after hydraulics are turned on and I try to move Z in handle. I am now getting another alarm saying I have a voltage surge. I think I may have more issues than I first anticipated. looks...
I have been trouble shooting a HT-30 with a Seicos A10l control. The alarm I am getting is a 1018 "Z communication Pulse Error". I am at the point where I think the encoder is bad on my Z axis motor....