My CNC has Hiwin HG25 linear bearings. My current maintenance has been to use a manual grease gun to questionably lubricate them. I say questionably due to being a one person operation I can't really...
Type: Posts; User: SteveS
My CNC has Hiwin HG25 linear bearings. My current maintenance has been to use a manual grease gun to questionably lubricate them. I say questionably due to being a one person operation I can't really...
That was my thought. Was wondering if any other machine ever did that. (Foam is too messy for me to consider.)
Couple months ago I came across a 4' x 4' 2006 Practical CNC at an auction and it followed me home. Minimal Google shows that company was not well regarded. The CNC was bought to cut prototype foam...
Thanks Gerry!
I was at HIWIN looking for this and could not find that document. It ends up that 25.4mm is ideal distance, appreciate HIWIN taking care of imperial customers. Now just to use a 1-2-3...
This is in DIY since the company that built it (Practical CNC) went bankrupt quite a while ago and I never saw it under power. The machine was purchased in 2007 by a university engineering lab to cut...
I was to that site so many times and never saw that!!! Would have saved me days.
Steve.
[QUOTE=hfjbuis;2464950]
That is not normal. You are right, it didn't need that today. I think my issue yesterday was going into Arduino and running a sketch which stayed active on the UNO
To get...
What I have is an Arduino Uno connected to a breadboard with three A4988 stepper drivers and one Nema 17 stepper. There is a 24v 2a source for the stepper.
This is a trial configuration before...
My CNC has a Nema 34 stepper for the Z axis from Sanyo Denki. The part number on the stepper is SH2861-5142.
In the catalog there is a SH2861-5141, but the mH inductance is 3.7 which would be a...
I've had bobcad since version 17, currently at 31 and had to read all the bad comments for a long time. Interesting to read the positives. Actually my best use of bobcad is creating wire frames for...
I have had BobCad since version 17 in 2008, I'm currently at 31. (I still think 21 was the best.) Much of my current designs are assemblies and parametric which Fusion excels at, that in my mind...
Jim,
I think there is not a lot that can be done to correct the limitations of the various softwares involved, at least not at a price point that most of us can handle. [That is the crux of my...
Jim,
I am amazed with Fusion CAM sometimes, I was milling a series of exactly the same circle pockets in a piece and it jumped around rather than going to the one just next to it.
Back in my work...
Rather than responding individually, I am going to cover most all here.
Peteeng - I have spent time on the phone twice with WinCNC engineers to optimize their INI file with my needs and some...
Jim,
WinCNC is used on several brands of $40-$60,000+ commercial OEM CNC in the cabinet manufacturing and sign arena. Sold to individuals at $1,250 so not really entry level hobbyist.
If there was...
This is a quote from the F360 manufacturing forum seems to summarize my situation.
"Unless the 3d op toolpath is aligned with an X or Y axis, it’s going to be line segments. It’s a fundamental...
UPDATE !!!
I called WinCNC and they were extremely helpful with my questions. Seems the things I was looking at were meaningless for my situation. They gave a couple suggestions that I will try....
I'm well past my 30 days free support from WinCNC purchase and don't see a forum on their site, so thought I would ask here.
In the "axisspec=" string there are two values I cannot figure out,...
Did it, all is working now.
Thanks, Steve.
My XP computer with parallel port starting to have erratic connection to all the USB ports, so mouse, keyboard and thumb drives got to be too much problem. It served me well for a decade.
I...
I think the $250 is reasonable and acceptable for the home hobbyist. My thought is there are a couple different types of customers; those who intend to build an entire machine verbatim, those that...
You should check out the weight of a 2.2 kw spindle, which I believe is 12 lbs. I recall people needing to put springs on the base Sherline models to help the Z axis stepper rise.
Steve.
At the website the plans are 70 sheets of PDF. Have you considered a price for the Fusion 360 file?
Steve.
I have a 16" x 20" benchtop CNC, circa 2005. I have installed a Dewalt DWP611 router. The design and gantry cannot support anything heavier and max 40 IPM (a single nema 27 drives both x axis lead...
What was the shipping cost from USA distributor to your USA location?
Steve.
I went to Sinjoe site and priced out a machine. In the cart all the shipping options show $0 .00. That doesn't make sense to the US, does it? Anyone who has had one shipped to US, what did the...
I can't comment on G43 use, is it superfluous or a reasonable way to set up for a safe gap from Z zero?
I use Vectric for CAM on basic 2D paths. If a solid, or 3D then I use Fusion for CAM.
...
N140G00G43Z0.9550H1 is Vectric way of setting safe z. For this file, cutting Z distance is 0.755" and the tool is to raise up 0.040" before starting to run.
Line N200G00X0.3130Y0.2839Z0.9550 is...
Yes and it is 0.50" height, I deleted the height and other information. I may run it later today to confirm.
Steve.
I move the tool with the jog function to the Z position I want and then choose "Z zero" from the panel. Never a problem with X or Y, which I set in the same way.
Latest G-Code;
( File created:...