Try removing line N815 you don't need it as spindle speed is defined by the M29 in line N450. This will cause a delay as the spindle is rotating then has to stop and orientate before tapping the hole.
Type: Posts; User: ensign01
Try removing line N815 you don't need it as spindle speed is defined by the M29 in line N450. This will cause a delay as the spindle is rotating then has to stop and orientate before tapping the hole.
I tried omitting the X & Y rotation point but still get the error
The code was
G68 X0. Y0. R12.
M98P1018
G68 X0. Y0. R24.
M98P1018
Etc-(works on our other machines using Oi controllers)
Maybe I should try dropping the X0. Y0. on this older control
Thanks
When I try and use G68 I get error 010 improper G-Code so I take it thts function is not available on my machine, which is an old Matsuura RA-2F
Can someone help?
Thanks