How do you know that G42 is not active?
It should stay active until you deselect it with G40.
The G42 is of course not visible for all new y x values.
Type: Posts; User: millingcutter
How do you know that G42 is not active?
It should stay active until you deselect it with G40.
The G42 is of course not visible for all new y x values.
Hello
The CAM program is not the problem- it’s the settings (parameter) of the machine.
The reduction of the feed is desired in order to keep the cutting speed constant when going around the...
Is there anybody making use of the new update 2010? Does everything went well??
Hello
This time with the answer :)
Air is always blown through the spindle, even when the machine is off.
We additionally installed a main stopcock for compressed air and reduced the consumption...
Hello
The electricity costs for my DMC 63 V + compressed air seem to be too high. 380 € for 176 hours per month, 8 hours per day.
What electricity costs for a milling machine do you pay and how...
Hello
Look at http://www.phorn.de/
Hello!
What nominal diameter do you mean?
The ø can be found in all table books depending on the pitch.
Sometimes there’re also recommendations for particular tools by tool manufacturers.
Hello
There’s a tool with which Cosmos can access your computer via internet.
I used it several times and it always worked.
A good contact person is Mr. Meerstein (Coscom in Ebersberg)
I have...
Hello
Try to get out by the manufacturer of the side milling cutter:
1. whether it’s suitable for 1.4301
2. if it is, then with what speed
You’ll have to decide about the feeding depending on...