Search:

Hello Stem, are you still looking? I might be able to help

Dear All,

Hoping to find anyone willing to help us out of the deep hole we are in. We lost all data from out of our 1995 Kitty My Center 3X with i80 YASNAC control.

Please help!

Thank you...

Hello there. Do you still have this machine with you ? I could use your help please. let me know, thank you

hello, do you still have this Excel machine with you?

Hello! thanks for your reply. the manufacturer is EXCEL but as far as I know, Excel and KIWA are, in many cases, the same machine with just a different tag.

Greetings,


We found ourselves in the worst situation here. Due to a misshandled F-ROM module replacement, we had lost our LADDER ARCHIVE.
Hoping to find a life saver with an identical machine...

Question for the experts. I am trying to box the mouse here and I am blind when it comes to verify/test the LMO-OM (load meter output) wires that come out of the FR-SX spindle drive. Does anyone...

Hello NorthMachinist, I know this is a very long shot but I would like to know if it`s possible for you to share a set of paràmeters from your machine. It will be greatly appreciated.

Flex

Dear forum members,

If anyone here have a set of parameters to help our bringing this machine back to life, will be very well appreciated. Thank you in advance. ...

Hello efm, were you able to solve this issue? I am going through the exact same scenary. I will appreciate you sharing your experiences. Thank you in advance.

flex

Greetings,

I am struggling with a YASNAC MX1 control / MATSUURA MC760-V machine that has been out of commission and relocated to a different country. So far I have been able to restore all tool...

Greetings to you all.

We are getting this EX451 alarm in our recently acquired MV40 MORI SEIKI mill. Spindle will not complete the orientation command and will give us the alarm. Spindle will...

Thanks for your reply, I am attaching a picture showing the RESET button I was reffering to. Perhaps the fact that I had the spindle running on JOG mode, it did not like to be stopped from this...

ANyone please share your thoughts and advices with me.

I've been trying to bring back to life an old 1987 MAZAK JEWEL with MAZATROL CAM 2 and a giant FREQROL FR-SE 18.5KW after 30 plus years of...

Do you see possible to alter the contents of the Ghost image with the proper driver(s) ? since we have been able to rescue most of the data out of the original HDD that failed in the first place. ...

Greetings,

Long story short. We are trying to recover from a HDD crash and so far we have managed to load a Norton Ghost image we had saved. The replacement HDD has 10GB size. while the original...

Hello J. were you ever able to sort this out? we also have a similar ACT 3 lathe, ours has a 15 TF control and looking for a FAPT operating manual.

FLX

Dear members,

Tomorrow would be our first attempt to reload all parameters on a 15TF control (OKUMA-HOWA _ACT-3) turning machine.
We've managed to get a backup copy of parameters from an...

hola Victor, me parece que tu consulta va a tener mayor respuesta en otro lugar dentro de los foros. Este es unicamente para equipo FANUC y si no me equivoco tu màquina no es FANUC: Saludos.

Dear forum members,

We have a 0-M / GE Fanuc plc system that was down for a while waiting for repairs, but what we did not notice is that the plc battery LED light went out and sat there for a...

Hello fellas,

Is there by any chance someone here that could have an image disk for a 840D MMC 102 win95 ? We have lost our original HDD and then we bought this replacemente HDD but we took it...

Dear friends,

Does anyone knows in here how to run a "system reset" on the MELDAS YM2 (or Y2) ?

I am reffering to the procedure it's supposed to be done by using the STI switch on the FX701...

Hello, we have a similar machine, AJV 25 /405 for what I see on your video it's almost the same. let me know if you still need it.

Greetings to you all,

I would like to have an opinion of anyone that has had experience with this RETROFIT offered by Siemens for the SINUMERIK 840D control. any ideas on how much does it cost?...

Yes. Hello, I'm working on making empty espace on my inbox right now, it's a bit difficult from my cellphone, please stand by. Thanks
FLX

Dear Jaideep,

With your permission, I would like to send you a PM. thank you.

Regards,

FLX

Thank you! we will give him a try for sure!

Regards,

FLX

Dear Jaideep,

You were absolutely right! There is a PCMCIA card attached into the NCU unit :cheers: I have added up seven new pictures into the same album of pictures, please click on the link...

Good morning dear Jaideep,

Yes, I apologize for not mentioning the issue we have with the LCD display, one of the operators had told me that this screen started acting up not too long after the...

Dear Jaideep,

Thanks a bunch! all of this info you shared seems very interesting and gives me hope! I will now try answering your questions.

Regarding the nature of the issue, Windows OS...