584,829 active members*
5,088 visitors online*
Register for free
Login

Search:

Type: Posts; User: eddiegnz1

Search: Search took 0.00 seconds.

  1. Re: Must I Buy Fusion 360 For This? Or Can Vcarve Create This Model?

    Correction, must i learn to use fusion 360 or can vcarve model this. You're right, it doesn't really have a sharp corner, that corner was drawn wrong it should be a rounded corner as you would...
  2. Must I Buy Fusion 360 For This? Or Can Vcarve Create This Model?

    please see attached photo
    it's a cavity that will be carved into an aluminum plate such that a small tube/pipe bent to a 90 degree angle (the elbow) has to be sandwiched in between two pieces of...
  3. Replies
    1
    Views
    708

    Gcode.txt Sample Test File Needed

    where can i download a very simple and short file that will carve any drawing or design even a simple straight line or a circle (it doesn't matter what the G-Code.txt file carves) on to any scrap...
  4. 6040 - How To Set UCCNC Spindle Parameters on 6040

    please see attached photo of the screen in the UCCNC software. I have no idea what i'm looking at but the spindle is not spinning at all. I ran a job and it ran the full job path correctly without...
  5. Re: Where To Buy UCCNC License? NOT www.CNCdrive.com

    I just ordered the License for UCCNC at 9:44am Florida time from cnc4pc.com (on Saturday July 13, 2019)
    thank you Arturo !
  6. Re: CNC4PC slow customer service UCCNC license second time

    wow, i'm glad i read this. I almost bought the license from Welcome to CNC4PC . Is there any place that I can buy the UCCNC license from and receive it within minutes like when purchasing all...
  7. Where To Buy UCCNC License? NOT www.CNCdrive.com

    I tried to buy the UCCNC license at CNCdrive - motion controls and all it does is send me an email with no license.
    Where can I buy a legitimate legal license for UCCNC ?
  8. Replies
    2
    Views
    836

    Will Mach4 Work On This Chinese 6040

    please see the 3 attached photos of my 6040 CNC from ebay/China

    1) the rear of the VFD has a parallel printer port (NOT USB)
    2) the UC100 motion controller converts that printer port to USB
    3)...
  9. Replies
    1
    Views
    1,300

    6040 vs 6040T vs 6040Z

    what is the difference between the;

    6040

    6040T

    6040Z

    or at least what are the main advantages of one over the other?
    and Which one is the newest on the market?
  10. Re: 6040 Break Out Board & Motion Controller Combined

    here's a "cheap USB to Parallel adapter" ... why wouldn't the UC100 work (as seen in the link below)?

    [URL]http://cncdrive.com/UC100.html[URL]

    or
    http://cncdrive.com/UC100.html
  11. Re: 6040 Break Out Board & Motion Controller Combined

    a
  12. 6040 Break Out Board & Motion Controller Combined

    if a 6040 on eBay/Chinese has a parallel printer port, does that usually mean that the "Motion Control" is built into the "Break Out Board"?
    Or
    that there is no "Motion Controller" inside the...
  13. Re: A 6040 With NO Mach3, NO Mach4, NO Mach At all

    1) is it possible with this eBay/Chinese 6040 that swapping out the motion controller could be a nightmare involving a guessing game on how to rewire the "Break Out Board" to the new "Motion...
  14. Re: Can UC100 Run At 400Khz So 6040 Spindle Runs 24,000 RPM

    ger21, I can't thank you enough for your willingness to help me.
    I noticed the AXBB-E is both a "break out board" and a "motion control" combined into one. But the Chinese 6040 from eBay that I'm...
  15. Can UC100 Run At 400Khz So 6040 Spindle Runs 24,000 RPM

    It seems the UC100 will max out at 100Khz which would not allow the 1,500watt spindle to reach it's full RPM of 24,000 on the 6040. Is that correct? please teach me this topic.
    I'm considering a...
  16. Re: A 6040 With NO Mach3, NO Mach4, NO Mach At all

    ...also, i contacted the seller and here's the response from the ebay seller...why MUST i use mach3 in the above ebay link
    ...............................
    Good day
    Thanks for your message
    This...
  17. Re: A 6040 With NO Mach3, NO Mach4, NO Mach At all

    thank you OlfCNC for that kind offer to look at the photo's. I have not purchased the CNC yet. I've never owned a CNC. I'm just trying to buy the one 6040 kit from ebay/china that will be the...
  18. Re: A 6040 With NO Mach3, NO Mach4, NO Mach At all

    ok, so the "Controller Box" that comes with the 6040 from ebay/china does not have to be replaced if I buy the UC100 and the UCCNC. Are you saying that all I have to do is replace one component from...
  19. Re: A 6040 With NO Mach3, NO Mach4, NO Mach At all

    the ones i'm finding in ebay say that it is not recommended for 64bit windows. If I buy one of those that say that, is there a work around that would let me use it on my 64bit windows 10? like...
  20. A 6040 With NO Mach3, NO Mach4, NO Mach At all

    Do all 6040's from ebay require Mach3 or Mach4?

    or is there a 6040 out there that doesn't require any Mach?

    I just want to buy a new 6040 and use either Fusion 360 or Vectric Vcarve on my...
  21. Replies
    0
    Views
    455

    Will The REAL 6040 Please Stand Up

    How Do I delete this post? thanks
  22. Replies
    13
    Views
    5,650

    Poll: Re: Sturdiest CNC For Aluminum Milling

    Well, I didn't mean the best in the world. because then I'd have to agree with you and say that the answer is none of those six.
    But just the best one out of those six. So even the best "one" out...
  23. Replies
    13
    Views
    5,650

    Poll: Re: Sturdiest CNC For Aluminum Milling

    I wish there was a way that the Original Poster (me) could delete the poll or edit it. I fumbled this poll. I would do it differently now and only include 6 options in order to delete the 4 most...
  24. Replies
    13
    Views
    5,650

    Poll: We all know that none of these are the sturdiest...

    We all know that none of these are the sturdiest above all (due to those that are in the $50,000 plus range... but in the price range of the above ten, which might be the sturdiest?
  25. Replies
    13
    Views
    5,650

    Poll: Sturdiest CNC For Aluminum Milling

    Of these ten (10) brands (not specific model numbers), which brand is most likely to be the sturdiest for milling aluminum plates when using a 2horse power spindle (NOT routers).

    a) Stepcraft
    ...
  26. My First Desktop CNC router; Shapeoko or Stepcraft, Or Which

    Please, if you would recommend a desktop CNC router for my first one, that would be awesome. I've been looking at kits that I can use a Kress spindle on (or a spindle under $400USD not a wood...
Results 1 to 26 of 26