Search:

fume extractor for laser used

used fumex fume extractor for laser, with a 6" duct flange added to it
tested motor runs

either needs to be local pick up or buyer need to pay freight cost, it...

80 watt lasertube new in box, tested

80watt laser tube 55mm x 1600mm
to long for my machine, in known working condition tested fine

I am in sarasota, fl and would prefer local pickup for this,...

I am finally finishing a bench top CNC conversion I started years ago and I just found that at some point I killed one of my 201x drives. I have just rebuilt the control system so it can now actually...

I agree, thank you for putting in the effort

If anyone wants I have parts designed to convert to a 1hp motor that mounts on top of the head, I am getting my plates laser cut right now

C

cnc plasma cutter 2" max cut 4'x8' table

cnc plasma cutter
dedicated control
has conversation programing interface
4'x8' usable down draft bed
160 amp plasma cutter, rated at %100 duty cycle...

if you are looking for help or a place to get access to tools to make parts look into https://artisansasylum.com/

one of the larger maker spaces in the us and they have a decent sized metal shop
...

is there any major difference between super torque and the GT belts and pulley types ?

being able to use gt pulleys and belts would be much cheaper and easier to source

Calvin

so i believe i have the spec at this point

the pulley on the spindle of an sx3 is a s5m, which is called super torque. the belt width is 20 mm

i am going to get a few pulleys made with a 1:1...

Does anyone know where to get a pulley that matches the spindle pulley for an sx3 ?

I believe it is an stpd s5m pulley so a super torque 5mm pitch pulley with a .625 bore.

I am switching the...

Does anyone know the specs for the spindle motor in the sieg super X3. I know it is a 1kw BLDC servo, but I need more info then that. I want to find a new controller to use and I need to figure out...

I would say 99

I bought the mill a little over a year ago. the length of the z screw is fine. From the looks of gregs post, he is showing exactly what I am talking about. So it looks like the original hole for the...

I am working on converting my super X3 using the Syil Kit, and I have run into a problem with the Z axis. The ballscrew mounting flang does not even come close to matching the holes for the original...

I would love to know this as well, or i anyone know anywhere close to Boston to buy scrap steel

do you have a web page for this project, I am really quite interested

Calvin

I am new to this, I am in somerville and I am converting an super x3 to CNC.
Is anyone on the area to discuss this conversion ?

Calvin

Mariss

do you have any new estimates on when the new drives will be ready for sale ? I am just about to start a conversion and I want to know if I should hold off until you release the new design ...

Hello, My name is Calvin
I am an artist and I have a project that I need to complete with a very short deadline

I need to get several ring blanks turned in the next few days

These are very...