You can turn auto-regen off by right-clicking the sequence start folder and un-checking auto-regenerate.
You can then regen from any point to the end of the sequence. by right clicking an...
Type: Posts; User: cadcamjohn
You can turn auto-regen off by right-clicking the sequence start folder and un-checking auto-regenerate.
You can then regen from any point to the end of the sequence. by right clicking an...
I am about to purchase a Mazak Integrex 200 IV S with sub spindle. Does anybody have any experience of programming this type of machine with Edgecam.
Does Edgecam handle the sub spindle ok, as...
Edgecam does behave a bit odd when machining flat lands from solid models if you have the level set at zero. I find that edgecam wants to machine at the top of the pocket as well as the base. To...
Just to let you know where I stand on toolkits.
I have been using Edgecam for 9 years now and have never used a tool kit. I am sure it is a useful tool if you are doing similar components but in a...
Hi
Dont forget to define your model of the stock as an edgecam stock item using the stock/fixtures feature in the geometry pull down menu.
John
Hi,
I recently used the adaptive feedrate for the first time on a stainless steel job with a 16mm ripper cutter. The cutter did 9 components instead of the usual 7. I have setting of + and - 20%...
The control is a TNC 410.
I think i need to read the book a bit before I get into this too deeply.
Mike,
You are right you can not choose inside-out or outside-in stategies while roughing any more in EC.
You could add a button to the toolbar from the "Superseded Cycles" Section called...
Hi, I hope someone can help.
Our CNC Setter / Programmer for our Bridgeport has quit. I can set tool lengths, datum point and so on, so i can keep working for now but can anyone help me with the...
Mike, I hope this helps.
In the approach tab of the roughing dialog box change the Maximum Plunge Depth from "0.0" to " " . Edgecam sees a diference between zero and nothing this applies...
Hi all, I am new here but it looks like it is the place to be.
I have been using Edgecam for 8 Years. here are some comments on previous messages that I have read.
Edgecam can handle any file...