Search:

This mill has Fanuc 18M control. The battery was replaced on the tool carousel servo drive unit. We need a procedure to move the carousel in small increments to establish correct tool alignment and...

Machine Sold!
Thanks for looking.

Technically you are correct. They are a government subcontractor. But all of the security measures and de-badging of the machine when it leaves their facility will still apply. I think the pictures...

232112 232110 Thanks for your interest Saibabamachines. The machine is located inside of an air-conditioned government facility in Arizona. I am adding a couple of pictures, but if you are familiar...

Up for sale is a Cincinnati Hypowermatic model 550-268.

Table Size is 26" X 144" (120" of X travel)

Machine was sent back to Cincinnati in 2003 for a complete rebuild. This included...

I have the same lathe with the same problem. Turret crashed, removed, repaired and reinstalled. Alarm indicates that a turret reference must be performed. Manual gives a nice procedure for a non-live...

Parameter/Toolchanger Problem. I work in a shop that has a number of YCI Supermax Rebel 1 Mills. Most have pneumatic tool changers that move both in and out as well as up and down. But one machine is...

Alarm 212 is sort of a generic Mazak alarm. It is telling you to go look at the magazine drive unit and see what the problem really is. On a M-32 control I have seen both Yaskawa drive units and...

One possibility is the mechanical limit switches that are used to home out the machine. If they are sticking it can cause the machine to home out at slightly different positions. Thus the value from...

check your private messages, I have the bulletin.

Most of the time Mazak uses LUBE brand lubricalion systems, but they also use Bijur. See web sites for parts

www.lube.co.jp/usa/index.html
www.devcocorp.com/BIJUR