No parameter.
It is an electronic malfunction on the screen
Type: Posts; User: rui.orfao
No parameter.
It is an electronic malfunction on the screen
If you have an absolute axis, the parameter you should change should be ABSOF, or PP177 or pp178.... that all depends on the connection or type of encoder you have in you system.
If you trust the cnc is ok and you are confident the problem is in the pc, you should check the com Number.
Normally usb adaptors assume COM8 or some other above COM4..... try to rename it to other...
The FAGOR controller is very easy to manage.
Any function that you need specific support.
Also, FAGOR have a world wide support network that you can use
Check www.fagorautomation.com for the near...
Can you be more specific (step by step) with the sequence to reproduce the problem?
The Ethernet is a payed option in that cnc model.
To check if it is active, go to main menu-> + -> diagnosis -> configuration -> software configuration
It should display a list with active options....
you are correct, you need to contact FAGOR for the correct solution for your cnc model. it is a payed solution.
normaly for cnc8055 you will need an external PC to install the agent.
after the...
first check machine parameter -> spindle ->p13"npulses".
if npulses !=0 then your machine have encoder feedback.
in this case, check spindle ->p29"lospdlim" and p30"upspdlim". measure...
Hi,
you must check if the real spindle speed is equal to the programmed speed. if not, the cmc will stop and wait until the programmed seep is reached.
check the spindle encoder feedback
kind...
can you attach the PLC_PRG.PIM program to check if you have some issue in that file?
kind regards
blank screen = dead CPU or dead graphic driver
you must contact Fagor service near you
kind regards
erockejm
the file name is always 6 numbers .pim. there is no work around.
but, you can add a comment to the program. in that field you can add any character you want.
this info will be saved...
kmarsus
maybe you have some issue with the spindle reading and the feed is set to G95(mm per revolution).
try to set the feed in mm/min G94
another issue can be related with feed hold...
hello Dmitrijs
the program is sent to the cnc while it is beeing executed? or you send the full program to the cnc memory and after execute it? one way or another please use boud rate 115200....
hi
for 8055 eprom series or 8055 and older cnc fagor controls, the cable pinout is 2 to 2; 3 to 3; 5(pc) to 7(cnc); join 4-6-8 at pc side; join 5-6-9 at cnc side;
try thye comunication at 9600...
for 8055 with eprom or 8050 and older cnc fagor controls, the pin out is 2 to 2; 3 to 3; 5(pc)to 7(cnc); at cnc side join 5-6-9; at pc side join 8-6-4.
set serial comunication parameters to their...
hi,
did you find electrical problems on the communication cable?
how long is it?
did you try it with 9600boud rate?
kind regards
hi
as you mentioned, there is no hardware reference trips and you noticed some pointers...
this is very common in very cheap and low end lathes. this is, indeed, the most simply way to do home...
hi,
you must check if spindle rotation is detected correctly. most machines don't move while the spindle is accelerating. you can check if F programed fiel turned yellow... this means feedhold...
Hello MarcoGAspar
the instruction #EXEC["MYPRG.NC"] will search for a program named MYPRG.NC inside "c:\fagorcnc\users\prg" folder by default. if your program have another name or is stored in...