Search:

You can try to upgrade to a newer firmware version.

Here is a link to get the new firmware for free. ..as fast as you want it.
http://www.rabbitlaserusa.com/DriverDisk/Firmwares/V4.3.1.5/
...

This type of laser “cleaning” machine has been made by a Chinese company over 6 years ago. I remember seeing a demonstration of how it works.. as a hand held “laser spray gun” that cleaned the...

Help is here,

Here you will find a folder full of schematics for Leetro style laser machines. You will also find schematics for RuiDa style laser machines.
...

Make sure to buy a laser machine that has a RuiDa controller and uses RDWorks. This requirement can keep you inside your target price range and also helps to ensure the rest of the laser isn’t the...

Data out of work area.

This means that you have created a project that fits the space, but you have moved the origin point to a place that the rest of the project will not fit into the laserqble...

Hello,

You have a pretty good description of the status, but did not say anything about a blinking light.

Look at the controller. Is one of the lights blinking. If not... Your controller is...

The problem is with the ”Screen Origin”

Press theZ/U button to go to the menu screen.
Press the”Screen Origin” button to select that feature
Press the Z/U button to change the screen view...

Hello,

I have seen this a few times...

The problem is much more likely to be in the logic portion of your laser power supply. The best and safest way to solve the problem is to replace the...

As I had said, the 63.5mm l me would do just fine for that thickness of materials. The problem of the 76.2mm lens is that the spot size gets larger, thus requiring the laser to cut a wider kerf and...

Hello to all RDWorks users,

I notice that we often ask each other about what settings did we use on specific materials. What is the best speed and power to use for a Poplar wood? What are the best...

Hello,

I am not sure if your lens is 20mm diameter or otherwise. It doesn't matter a lot.. except that your lens needs to be able to receive the entire laser beam. I would hope your lens is...

Hello to all RDWorks users,

I notice that we often ask each other about what settings did we use on specific materials. What is the best speed and power to use for a Poplar wood? What are the best...

You must make sure to install the USB drivers.
I have found that connecting the USB driver is not always a perfect solution. The computer can become clogged with alocating serial port numbers so...

C'è sempre qualcuno che può aiutare

Vendor Settings password "rd8888"
The easiest method is to set each parameter in the "vendor settings"

X-axis step 7.9375 um
Y-axis step 7.9375 um
Z-axis...

Bruce,

On a hardware level, you could trigger the laser on/off by using the step/direction signals from the controller. The Z-axis goes down with a direction signal high.. and goes back up with a...

Rabbit Laser USA
1320 Hook Drive
Middletown, Ohio 45042

Offices: 513-217-5707
[email protected]

Non-Metal CO2 Laser Cutting and Engraving for materials under 3/4 inch.. with work...

If you are going to cut PETG (clear looking plastic.. not acrylic) .. you can't use the gold-coated Silicon. The gold will react with the PETG and flake right off. If you plan to cut and engrave a...

I would recommend that you try to re-install the firmware. You can find the firmware on the server of RabbitLaserUSA.com web site.. You need to check the section for software and drivers.. then open...

I would guess that your 100mm lens does not have such a small spot size. It is typical that as the focal length gets longer, the spot size also gets larger. If the beam spot size is larger, then...

With two years of service on the laser machine... I would recommend a new set of mirrors and possibly a new lens. The mirrors can start to distort the reflected beam ..due to heat stress and...

Scottbgv,

Rabbit Laser USA does not sell laser machines with the RD controller... but they have had to repair those laser machines before. The RD-CAM 6 software is on their server. You would...

The black cable behind the power supply goes to the laser tube.

The 5VDC is used on one end of the potentiometer. Other end of the potentiometer is GND (0 VDC). The wiper of the potentiometer is...

We need to know how much voltage you measured at the estop button and inside the connector. If you are only measuring 110 VAC, then it is likely that you are only measuring half the 230 VAC that is...

You can get tech support for any Hurricane laser system from Rabbit Laser USA. Rabbit has a local guy in LA. You can get simple tech support free by email.. You can also get paid tech support if...

here is a link to the examples and projects for puzzles.

www.rabbitlaserusa.com - /examples/DXF_assorted/

Thank You,

Ray Scott
Rabbit Laser USA

A bit late on this thread... but to anyone looking for building their own laser... or fixing a laser system from another vendor.. YES.. We do sell parts to anyone that needs to repair or upgrade a...

I would expect your power loss to actually be from degrading quality of the mirror surface. A lot of people would start blaming the laser tube and don't realize that a more common problem is in the...

Dave,

Send me a private email with the qty that you need. We have a few styles in stock, so please indicate the tube diameter and lens size.

Ray Scott

Hello to all,

I am currently at an airport...waiting for an airplane. I thought I would take some time to just tour around cnczone... To answer some questions for random people. I do appreciate...

I have also found that the MPC03LV board is no longer made. The best bet is to find a Chinese laser company thefts till has a board in stock. I called about this problem and found 3 out of 7 vendors...