Hello there, does this machine have a seikos PLC? some of this old machines make by Hitachi uses an external PLC to handle tool change, lubrication, and also spindle activation.
what control is...
Type: Posts; User: Bordaco
Hello there, does this machine have a seikos PLC? some of this old machines make by Hitachi uses an external PLC to handle tool change, lubrication, and also spindle activation.
what control is...
https://www.cnczone.com/forums/attachment.php?attachmentid=447076&stc=1
Hello everyone, Does anyone know what this message is about?
My old VMC, always true to work, (Hitachi 6M from 84') woke up...
yes, I know the +vdc and GND, but very confused on Video, vSync and HSync, I cant get any signal, maybe the video card is toasted, need to try with a video converter, like gombes, but not results.
Thanks for the advice, already check the fans in the beginning of the problem, they are fine,
Can any body share the pinout for the video flat cable?
Thanks in advance
Nobody????
No hay nadie que pueda darme una mano con estos siemens?
Hello everybody
I have a lathe with the Sinumerik 810T GA2 control, this lathe was running a few months a go, but now is like dead :drowning:. this is my first Siemens control, I usually work with...
Thanks for the reply, and yes all your advice's are valid, but that means that i have to edit the post-processor in the cam soft.
I was looking to use the standard FANUC metric 3 axis post that i...
Hello to all,
I'm finishing my retrofit proyect on a Kondia B1000 cnc, we just pickup the Kflop + Kanalog combo for this project because the analog card, very helpful,
The machine is running very...
Tal vez los ayude esto, despues de generar el codigo G con el mastercam, lo edito para acomodar a los parametros de mi VMC con el CIMCO V5 que es parte del CIMCO DNC, esta en ingles pero te muestra...
Hi Al_The _Man, yes the error #12, but I think the transistors are fine, or I measured in a wrong way ¿?. Any way, we can get a used A06B-6044-H017, a little big than the original, the vendor tell me...
Hello
I have problems whit my AC spindle servo driver from Fanuc (A06B-6044-H016) first get alarm 2 "speed is deviated from the command value due to overload and others" but now it come on error 12...
We are lookong for a techinician on CNC whit NAKAMURA knowledge, to come to Bolivia to fix this machine. VERY HURRY!!!!!!
Hello to Everyone.
I have a Nakamura Tome Slant 3BX whit a Fanuc 11TTA/F whit FAPT, 4 axes.
This machine are down, and we have an EX50 error code, I like get in contact with people who know this...