Congratulations on your new CNC models!
They seem realy well built and the configurations available are just great!
:cool:
Type: Posts; User: nokturn
Congratulations on your new CNC models!
They seem realy well built and the configurations available are just great!
:cool:
This is gantry machine so A axis must control the second servo for X axis. Otherwise one motor will pull from one side and the other side will be dragged. About changing machine size i advise...
KTM, i'm sorry but i don't think any of those kits will work for you.
For your project you need to control 6 axis like following:
- X+A for moving gantry on x axis
- Y
- Z
- C (360)
- B (+-90...
I hope you understand how much building/buying a 5 axis machine will cost...
I'm not sure i understand what you mean with near vertical wall milling. But if i'm correct you should solve the problem by making the machine x and y axle travel bigger in order to be able to lower...
Maybe you projects require 4 axis(c axis) 360 degrees rotation agregate with manual adjusting milling angle or 5 axis( like the Hendrick machine in my earlier post).
I belive you want to build...
A good place to start is Hi-end magazin, Hobby CNC, kituri si materiale
You will find stepper motors, servo motors, drivers, linear guide rails, inverters and so on.
It won't be enough to make a...
For this project you must use linear guides.
http://www.nookindustries.com/images/ProfileRail.jpg
In this case yo will need two servos for driving X axis(moving the gantry), one for Y axis and one...
Good observation! This aspect eluded me.
i think it should be something like this:
http://i00.i.aliimg.com/photo/v0/426834968/Foam_mould_milling_machine.jpg
Just machine table must be at floor...
this is an example of screw guiding
http://i01.i.aliimg.com/photo/v0/112238203/Screw_Guiding_of_Inside_the_Profile_90x180.jpg
CNC Styropor Schneidemaschinen und CNC Fraesmaschinen | cnc-multitool GmbH is the site where i found the machine i posted.
As i can see in the picture there are two servos driving x axis, one servo...
Your machine table should be at the floor level. This is in my opinion the simplest frame you can build. But i don't think you will get enough precision with this type of frame. For z=1500 you will...
I advise that you start a new topic describing what you want to build and what you plan to use the machine for. I think many people will help.
Good luck!
So... For you it's all about quantity not quality. No wonder you have to work so hard...
Glad you solved the problem. I'm looking forward to recive Biesse Cabinet software along with Rover A4.3 CNC machine. I would like to know what you think about this sowtware.
Put your brain to use and stop whining. If you want a better country help building it, don't just stand there crying like little girls. Be proud of who you are and be proud of your country because it...
Hello,
I'm also from Romania. I'm now waiting for a Biesse Rover A4.3 woodworking CNC machine to arrive.
Good luck with building your own cnc.