521,915 active members*
1,964 visitors online*
Register for free
Login

Search:

Type: Posts; User: squirrel_41

Page 1 of 6 1 2 3 4

Search: Search took 0.00 seconds.

  1. Replies
    1
    Views
    23

    Mach3 ESS Machine runs real slow

    Hi guys I have been using Mach3 for many years
    My Machine is capable of doing 30mtrs per min although I have ever only run it at that speed once to do a drill pattern of thousand of holes in a piece...
  2. Replies
    11
    Views
    181

    Re: Yaskawa Ac Servo encoder re alignment

    When I get 5 mins to spare I will set my motor up on the scope and takes pics of the probe points and the scope it may take me a few days.
    cheers !
  3. Replies
    11
    Views
    181

    Re: Yaskawa Ac Servo encoder re alignment

    Its pretty much the same as Al_The_Man says you do need a scope to check the alignment and the pulse
    I back run mine with just a small 12 volt dc motor with a belt drive on the scope you easily see...
  4. Replies
    5
    Views
    1,563

    Hi could you send me the Gerber and drill files...

    Hi could you send me the Gerber and drill files Thanks
    squirrel@thekis.com.au
    cheers
  5. Replies
    11
    Views
    181

    Re: Yaskawa Ac Servo encoder re alignment

    Okay I found a faulty chip on my Yaskawa encoder the chip no is "Yaskawa jl-041a" after replacing this chip and re-aligning the phases I am happy to report this motor is now working perfectly thanks...
  6. Replies
    12
    Views
    622

    Re: Dyn4 drive for older Yaskawa servo

    would you know where I could get a Yaskawa encoder dp9304138 for a sgmp-08a312
  7. Replies
    11
    Views
    181

    Re: Yaskawa Ac Servo encoder re alignment

    Yes in my post I state that this is a ac servo I do have a 4 channel Tekronix scope 2465B I aslo have 2 other identical servos in perfect working order
    As a hack I could back drive one of my other...
  8. Replies
    11
    Views
    181

    Yaskawa Ac Servo encoder re alignment

    Hi Guys
    I just replaced the bearings on one of my yaskawa sgmp-08a312 ac servo and now is seems that the encoder needs to be re aligned
    I removed the encoder with great care it is fixed to the...
  9. Replies
    1
    Views
    214

    Re: Homing problem ESS

    Hi okay I had the same problem and the trick is to set the ports and pins in Mach3 ports and pins
    If you read the bottom line on the homing page of ess it says

    E) Only assign values to the three...
  10. Replies
    0
    Views
    94

    Nertajet Zip 20-40 amp wireing

    Hi guys does anybody have a Nertajet Zip 20-40 amp plasma:wave: cutter that could help me with some wire numbers
    I was given a unit that had some parts missing and I need to know the wire numbers...
  11. Re: Determining the velocity of an axis near real-time

    Maybe something like this 813 GetDRO/SetDRO Blended Velocity DRO 813
  12. Re: Need some advice/assistance re configuration and Z axis is nutty.

    You are trying to run the steppers way to fast they are missing steps slow them down and then bring the max speeds up to a point where they are not losing steps
  13. Re: Anyone familiar with motion controllers/software which can support dual loop cont

    I don't know if I am reading this correct but I am using Yaskawa AC servos these can be configured to out put a error if it they do not arrive at the requested position I use this error in Mach3 to...
  14. Replies
    0
    Views
    232

    Re: Tool probe problem

    it looks like your reaching the end of a g31 move place the probe about 10mm above the sensor and try again
  15. Replies
    4
    Views
    267

    Re: Ref All Home Button Not Working Right

    Before you try to ref all home check you diagnostic screen and make sure the switches are not all ready active
    if you have a active switch it will send the first homing axis in the wrong direction...
  16. Replies
    1
    Views
    214

    Homing problem ESS

    Ess Mach3 Version R3.043.062 PLugin a-v10-f1


    Hi guys I have been using the ESS for a few years now but I just decided to try the ESS homing function
    and ran into a problem
    Homing works as it...
  17. Replies
    127
    Views
    1,090

    Re: 4th axis touch probing

    Well in all the Testing I have done with Mach3 G31 probing can be a real pain and quite problem matic
    One thing I do know for sure is Mach3 does not respect the soft limit settings in a G31 move...
  18. Replies
    127
    Views
    1,090

    Re: 4th axis touch probing

    The A axis should only require 1 rotation to complete the job but if the object is complex and has protruding parts for instance the knight from a chess set (Horse) with ears neck nose excetera
    It...
  19. Replies
    127
    Views
    1,090

    Re: 4th axis touch probing

    I did not add a 2.5d surface probe routine however I recently needed this function my self so as a quick work around I did build a routine to do this which is not currently in the current macro files...
  20. Replies
    127
    Views
    1,090

    Re: 4th axis touch probing

    The 4th axis probes routines are for objects placed in the rotary 4th axis ie A axis it can be parallel to the X or Y axis selected from the interface.
    The object is then probed for 360 Degrees,...
  21. Replies
    127
    Views
    1,090

    Re: 4th axis touch probing

    I have no Idea I use it myself on a daily basis I can only tell you it has been downloaded over 600 times I built the routines to suit my needs
    I have had no feed back from any other user (good or...
  22. Replies
    127
    Views
    1,090

    Re: 4th axis touch probing

    My probe routines do 4 axis point cloud for Mach3 search for "Squirrel Probes"
  23. Re: ESS not communicating with the computer

    I would start by testing the ethernet card itself by sending a constant ping to the ip address from a command prompt type "ping -t ipaddress"
    If this test okay I would then check the cable between...
  24. Replies
    10
    Views
    634

    Re: New machine GCODE

    This looks okay but you need to sure about the "g53 Z0" g53 means to move in machine coordinate so you need to make sure that g53 Z0 retracts the Z axis to the top of it's limits and not the bottom...
  25. Replies
    10
    Views
    634

    Re: New machine GCODE

    What version of mastercam are you using and what is the name of the Post Processor you used
    also what Machine Def did you select
  26. Replies
    3
    Views
    320

    Re: Huayang VFD Hidden Commands

    I'm not going to bother to answer this if you think you are a cut above the rest of us poor stupid people have a good life.
  27. Re: Smoothstepper ethernet or Xhc Mk4-v 4axis ethernet?

    Best thing I ever done was to buy a Ethernet Smoother Stepper
  28. Replies
    3
    Views
    320

    Huayang VFD Hidden Commands

    In order to test my Huayang VFD After I done some repairs I wanted to run it on a safe Low voltage because I was going to be probing with my scope all over the place

    In order to do this I needed...
  29. Re: Mach3 Probe routines full auto on rectangles at any angle

    The file link has changed to
    https://dl.orangedox.com/nVdNa3IFiTCchbpdIu
  30. Replies
    12
    Views
    762

    Re: VFD Problem

    Hi Mactec as you know my vfd blew I replaced all the blown parts and tracks checked everything connected it up and it blew again
    So again I replaced all the parts and rechecked again and again could...
Results 1 to 30 of 162
Page 1 of 6 1 2 3 4