I am trying to use three tools in one program, I am facing, drilling and parting a 7/8 aluminum hex stock. I open the tool table select a tool number jog my tool to touch off the z and the diameter....
Type: Posts; User: EPaczkowski
I am trying to use three tools in one program, I am facing, drilling and parting a 7/8 aluminum hex stock. I open the tool table select a tool number jog my tool to touch off the z and the diameter....
I agree with everything that n1tr0 said! My main problem is that I never ran or programed a CNC machine before. I am still in the learning mode as a home shop machine. I don't run it all the time and...
Thanks checked it out. I could not find a similar question in the 200 post so I posted the question to Ron.
I have and issue with the spindle direction in both wizards, the rotation stays CW. In turn, I have to edit the program with M4. In NFS I built the tool and checked front post and CCW. When I post it...
I am new to CNC machining have no idea were to start the documentation with Mach 3 is good but I need to learn from the start the documentation seems to be geared to someone with a basic knowledge of...
Set up the unit on the stand and powered it up today. Need to work out a few bugs with JT. The quality is actually a little better than I expected.
310954
Small block
I have not seen the machine yet and would like to know the spindle mount type. I have a 5C closure on my lathe that I would like to adapt to the Mill Turn. Is this spindle a standard...
Thanks
I just read your last post from beginning to end. I have never worked with a CNC machine and have a lot to learn. My son has programmed cnc machines years ago so he has some background. I...
Just sent the check for the Shop Master with the new shipment of machines to arrive this this month. I have been looking at this machine for many years and after buying lots of old junk and...