Search:

Sent an email to Talent, very fast response.
Here is the manual they sent me for your use in case you need it as well.
Cheers
:banana:

Hello
Got the talent inverter model number VG 3000 -7P5-4G (7.5 KW)
I have an error message (E0CA) while trying to run the CNC router.
Please send me whatever english manual you got for talent...

Thank you all for your replies and the useful links.
Cheers

Had the same issue with my CNC Plasma cutter some few years ago. The issue was the unsupported length for a specific diameter at a critical speed. I had to get a larger diameter ACME screw and the...

:confused:Does anybody know where I can find free cupola plans to melt iron?
I looked online without any luck.

Please help
Looking for a CNC router that can machine both sides of a wood panel board (60 in x 120 in) at the same time.

JerryFlyGuy,`
The y axis is driven on one side only, but there is a second rail on the other side- see solidworks pic. I do get some minor wobble on the unsupported side. The way to fix it is to...

JerryFlyGuy,
I will really encourage you to move ahead with your airplane design. Actually I was going the same route designing my own airplane and fly it. I built a CNC plasma table for that...

Good work Mike, I'm impressed with your boxes. Did you connect the gecko box to the plasma table yet? I will certainly buy some boxes from you once I finish my new CNC router.

Good experience, I'm glad Gecko provides excellent service. We can't say the same about Rutex (i.e. unanswered emails from Vladimir, "phantom" lead time on their web site etc..)
Thanks God for Gecko.

Hey JerryFlyGuy, are you thinking about building the canard aiplane?
Could you post the SW file?
Thanks

Both Rutex www.rutex.com and gecko www.geckodrive.com have controller for brushless motor. The encoders will connect to the controller and drive the motors as instructed by the control software such...

I have tried a similar right angle design a while ago and it never worked. I found out after spending money on Aluminum angles and cam followers that the angle in fact is not at 90 deg and the...

Got my head digitized in glass in Vegas as well, not acrylic for sure.

Great design . How did you make sure that the X axis rails are perfectlly parallel to prevent gantry binding?

Tom
How do you disable the brakes (is there a way to remove them without destroying the motor?)
What's the lead time on the 2030 drive?
Have you tested the 1000W motor yet?
Thanks

For Rutexus:
Tom,
Were you able to connect the 1000w motor to the drive yet? Would like to know if there are any issues (you mentionned a braking resistor, what's the value?)

Bought a few of them as well. The same motors are on ebay for $150 each. I think someone is trying to cash in too soon.

motors at www.surpluscenter.com

Good news from Rutex. Their drives work with the surplus center AC servo.
Follow this thread for an update:
http://www.cnczone.com/forums/showthread.php?p=108123#post108123

That's really good news Tom. I bought 6 of the 1000W motors and I hope that when you get yours, everything will work okay. I look forward to your testing. I am planing to order the new Rutex drive...

just ordered some 1000w mortors, looks like there are some issues with commutation. Have not received the motors yet. You can follow this thread for update. Rutexus has tried the 400 w motors....

Cosmosworks is great. I can run the analysis for you if the model is not too large. Have cosmosworks on my PC.

Really nice. What motor torque are planning to use to move the gantry?
Just one motor to drive the gantry?

I use poly scientific motor C23 series (www.polysci.com )for all axes and 250CPR US digital encoder.

Mike,
Tonight, I will email you the beta version of steelcut I have. My table is about 4 ft x 5 ft cutting area. I'm using inch dimension.
I may not have correctly tuned my motors yet. I just...

One more precision, I have 32 oz.in servo motors with 360 oz.in peak torque

I just finished building my plasma table. I have a Rutex R510b board and I am able to draw some basic shapes. However I am not able to draw nice circles. I hooked up a pen on the Z-axis for testing....

J'utilise steelcut pour tester ma table. La carte R510B est un bon produit mais il faut un meilleur software qui marche sur windows. La carte est facile a connecter et je pourrai t'envoyer mon...

I just designed and built my CNC plasma table with the R510B. Table is working but I have some concerns with the driving software (I am using a demo of Steelcut- the guys who developed it are out of...