I hope you get it going. Kurt can fix it if it is fixable at all. He is sharp!! Look forward to you being up and running!!
Type: Posts; User: Ican
I hope you get it going. Kurt can fix it if it is fixable at all. He is sharp!! Look forward to you being up and running!!
I might suggest unplugging the network cable. Then, replace the cards where the original slots. Lastly, reset the computer to the last known (or before) date that the mill ran as it should. You...
Sorry, I have been on the road.
We use a .0625 ball end mill for this type of engraving. I like the finish in the bottom of the engraving the 4 flute leaves.
Enjoy!
444916
We run 4 of these machines in our shop cutting Aluminum, Titanium, Plastics, Brass...etc.... If you have the surfaces clean on the column and tighten it down it should not move. In 20+ years, I have...
You nailed it! This line in your post ALMOST says it all..... "My main concern is rigidity. No matter what you do to the taig, it does not have the cast iron base of the Tormach mills" Change...
Hello,
We have been selling Taig for 25+ years and ship world wide. I would be happy to help. You can PM me here or e-mail from our site... Index For DeArmond Tool.
Many Thanks. Dan.
Mobil Vactra #2 is nothing less than fantastic. We lube every machine in the shop with it and have for years. Hope this can help.
Hey Under... Glad you are clawing back!!!
Your shop vac will work fine for things like delrin , etc. You can gather about 60 to 80% of the metal chips, depending on if you use...
Still not working for you. No images.
If in fact someone put on an ER-11 spindle, you will need to replace the spindle with an ER-16. That being said, you may as well need the mounting plate and other parts. Your images are not working....
The Taig machines can hold extremely clost tolerances. That being said, the folks I see having problems are the ones that seem to think you can't machine unless you are stuffing a 3/8" end mill 1/2"...
Best Idea Yet!
EDIT.... If you know who the original owner was they might be able to look the order up. That way they will know exactly what was sold and it would be easier for them to help. We...
If you have knobs on your motors, you won't have encoders so that is a stepper system. Make sure your printer port is addressed to 0378... and I would think...that since it is a stepper machine you...
Is this a stock Taig mill?? Let me know some specifics and I am happy to help. Thanks. Dan.
We cut a lot of different materials with all sizes of ball end and end mills. We slow the plunge speed or ramp into the material, depending on what the circumstances are. We have "0" problems with Z...
You can figure all this out using SFM formulas..... OR ...... If your machine is a stock Taig unit.... you can use this little method.... looking at the spindle pulley put your belt in the second...
I sent you a PM. THANKS!
Best advice I have seen here in a long time. :)
Odd. Since it isn't showing in your path in your CAM program, I would look at the tool description and make sure the CAM has the correct tool information to path from. As well, path the part wit a...
What tool are you using?? It looks like perhaps the tool radius is too large for the part radius???? Can't really tell. Is your CAM package showing a good path? A path without the flat spot? Is...
Thats reasonably simple work... did you get this done??
I sent you a PM. Thanks!
Personally, I would look for any option available before attaching a chuck to that spindle nose. Spin that rascal VERY SLOW if you decide to do that. Anything that might go wrong will be greatly...
Delcam sold to Autodesk some years back. This is an AS IS piece of software. Anyone interested will be told that. It is not supported, upgraded or continued by Autodesk. This is known throughout the...
I have Artcam Jewelsmith 2008 & 2010 for sale if anyone is interested.
Thanks. Dan
A good refurbished Dell with Windows 7 32 bit makes the mills run smooth as silk. All you need base line is a paralell port. If the computer doesn't have one, they are about $10 almost anywhere. ...
We send it out. ...or we did. Our guy first lost a pump, then the refrigeration, that shut him down for a week or so. SO.... the EPA stepped in and told him that since he had been closed X days, a...
Thanks Tmarks,
I hope the rascal continues as it is. Here's another one... I sure like the finish we get. Makes the rest of the work easier for sure.
366688