Search:

Hi MTP2,
Check out this video How to add your CNC Machine to CAMWorks - YouTube

I hope you find it helpful.

Best regards,
Lars

Hi laurits,
You can control that on the Feature Option tab->Entry Points->"Check" Length and Angle, and make your desired adjustment.

Hope that helps.
Best regards,
Lars

Hi brandper,
Hope you got your problem solved by now...but :-).
It sounds like your license manager is not looking the right place for your license key.
Go to All...

Hi Jason,
I hope you are doing well.
I believe the default database only see's "Bottom Radius" as a Rough strategy, but Feature Recognition see's it as a Rough/Finish. This can easily be controlled...

Hi Joesph,
I don't see anything wrong with mixing the tools up. What ever you have on hand, right? :-). All you have to do is changing your units in SolidWorks. Actually pretty sweet that added in...

Hi Joesph,
The stock manager is using the SolidWorks XYZ in the stock definition. So it depends on how your model is placed in regards to that. I normally glance at the 3D gnom in the lower left of...

Hi Japazo,
If I understand what you describe correctly. You do not need to create the sketch. You can pick the edge at the bottom of radius as well as the top of you part to set the Z height, right...

Hi Andy,
I hope your reseller gets this solved quickly for you.

Best regards,
Lars

Hi Andy,
I agree, hand edits should be avoided. Have you talked to your CAMWorks reseller? They should be able to give you some good guidance.

Best regards,
Lars

Hi Bishbash25,
Sort of plus some more.
There is a "getting started guide" under help in the UPG that will get you started.

Best regards,
Lars

Hi Bishbash25
There is a Heidenhain 426 through the Universal Post Generator, but if I was you I would contact my local CAMWorks reseller first.

Best regards,
Lars

Hi laurits,
The Sections tab->Section Categories=Rapid Moves->Section List=1st Rapid Z Down.

You want to be very careful when playing with posts. One wrong entry and you can have a machine crash....

Hi eldahan,
Have you tried contacting you CAMWorks reseller?

Have you tried contacting your reseller?

From previous post in regards to Mastercam and Solidworks.

To quote gcode from emastercam forum:

~~~~~~~~~~
In SolidWorks go to Reference Geomtry/Coordinante
Systems.. use that command to...

To quote gcode from emastercam forum:

~~~~~~~~~~
In SolidWorks go to Reference Geomtry/Coordinante
Systems.. use that command to create a WCS
that matches how you want your model oriented
in...

I would probably recommend that you posted your question in the Mastercam section on this forum, there are some very smart people on this forum who know a great deal about Mastercam, they might just...

Congratulations, but I would tell management to keep Mastercam X and use the money on a 1000 psi unit insted :-)

Time to replace backup batteries I guess :-)
I would try to see if there shouldent be a disk in the electric cabinet, many times the installer will make a backup disk that he is hiding...

I would be concerned running anything that old except a Agie or Charmilles, I do not know that much about Sodick but I can tell you that Mitsubishi never build a machine with the idea that it should...

Is that Sodick?

The CX20 is the bad apple in the Mitsubishi family, if I was you I would find another machine, maybe even consider upgrading to the FA series.

I have always had good luck with IGES, but just always remember that converting a file from one to another is like translate japanese to norwegian, many times something will be lost in translation.
...

Do you have any manual machine experience?
Reason for asking this is that if the answer is no, I guess that my suggestion would be to bite the bullet, hire someone and maybe look over his shoulder....

Your entry is controlled by a breaking point in your geometry (Sometimes you will need to break the geometry a surd-en place, to get your desired entry point).
After you have chained your geometry...

Try to give Renishaw a call, and ask for there tech support, I have found that they are willing to go be on customer service.

Lars

Bigger table, normally means bigger frame = more rigid.
BUT, you should be perfectly fine with the VF1, I would be happy to do prototype work like you describe on a Haas Minimill.

Lars

Do you have programs with the same name in both path 1 and path 2?
you should (as far as I know) be fully able to pull sub programs from path 2, with M98.
The Fanuc 31i control is properly one of...

Can you thread form the holes instead? I have production jump what I thread form 4-40 in 6061, and I replace my thread former every 1500 holes.

I am not a post genius, but if you look in "psof" there should be a line that sayes"pbld, n, *smetric, e" that is your G20.
And in the following line that should be a "*sgplane" that is your G17.
...