Search:

Hi , I would like to know if I were to match a undersize refrigerated air dryer to a air compressor, will the output air flow from my air compressor be affected?
Or the results would simply be the...

Hi all, how do i control stop and go function of the rotating indexing cam table that includes the 3PH motor with brake with VFD.

Can I program the motor to brake once it reach the position...

Hi Dawson, I do not require the NC codes, I will be using robot to do the grinding process. I am actually looking for such spindle that is able to grip the polishing tools without the need for adapter

Hi, this is the link
https://youtu.be/Ppjz26BM1KQ

Hi all, I am designing an automated robot grinding, the grinding process will be using lots of shaft mounted grinding tools, ie 15pcs per workpiece.
Therefore I would like to design the auto tool...

Thanks mactec54, it does works.

:)

Thanks I will try that out.
But I can’t understand why does shorting L1 and L3 allows the driver to run with 1 phase?
Does it affect the output power or torque?


Sent from my iPhone using...

Hi Thanks I will give it a shot, will this method fry the driver?

I have heard of that, but currently i am not able to the ways to wire the driver to allow 1ph usage.
My application is mainly for my automation system.

Thanks, for the advise.
Is there anyway to run the drive ; using a external capacitor will it work; or VFD?


Sent from my iPhone using Tapatalk

The driver is SGDM 08ADA

How do I derate the driver to allow 1 phase usage?

Thanks


Sent from my iPhone using Tapatalk

Hi thanks for the fast response, after hooking up with a 1 phase 240v , I got an AF1 error, which refer to a missing phase. ...

Mine was a SGDM 08ADA 200v

as above,
am i able to use a external capacitor and leg it up to the 3rd power input L3?

Thanks

hi, i am facing this issue, powering up a 3phase yaskawa servo driver using a 1ph power.
Am i able to connect a capacitor for the 3rd leg power? similar to powering a 3phase motor using a 1ph power.

Just happen to have this problem yesterday.
My 150w power RECI tube has very odd power output.
We did test using paper; directly shooting out from the laser lens, and this is what we got:

At low...

Hi I am also facing the same issue of not able to control the spindle speed using DSP 0501. You mention a11 could work using the S parameters in the G codes. Do you mind explaining or show us how it...

Hi all,

been using the RZNC 501 controllers for 3 -4 years.

Every time i start the new cutting process, the system will automatically goes to SPD GRAD 7, even though during the processing menu,...

Hi all,

Would like to know what type of adhesive is suitable for DuPont 801, it is another form of nylon.

We would prefer fast drying adhesive ie: cyanoacrylates.

Able to withstand heat of...

Hi there,

just wondering what tools will be more efficient or advantageous.

To smoothen and grind off narrow welding seams. Mounted grinding stone or cartridge roll?

thanks

Hi all,

i have a chinese router using RZNC DSP controller. CUrrently my rack and pinion axis X and Axis Y are having a slop of +/-0.25mm.
Can i use the screw interspace function to compensate...

Hi all,

I am having some sort of area clearance while using Artcam 2011.
I am doing a 2D area clearance with diameter 52mm, using a 6mm end mill. It turn out to be only 51.5mm

I try to change...

Whenever I switch on my machine, the power trips. My machine consist of 1 pcs 750W yaskawa servo. I realised sometime when switching on the servo individually without power trip, my lightings fickle....

Hi All,

Just purchased a Chinese made CNC router.
My main cutting material is MDF and ply wood. I am getting burrs from the cut, and it required too much sanding.
Would like to know or is there...

Hi,

In my country, the voltage output is rated at 240Vac 1ph. But my yaskawa servo driver (800W) requires a 240vac 3 ph. Am I able to use a static phase converter which is easily available on...

Oh thanks I almost did trying using a VFD, but strangely why it is not possible? It does output 3 phase afterall.


Sent from my iPhone using Tapatalk

I am still having problem finding a phase converter in Singapore. I does have 3 phase in my premises, but the voltage output is 400vac 3 phase, what I need is 230vac 3 phase.
Just wondering is it...

am i able to do such a thing?

Hi all,

I am having some issues with the 3phase 240V servo pack. Our country power supply is 240V 1phase. How do I wired a 3phase 240V into the yaskawa SGDM 08 servopack?

Thanks