Yes, i can backup all files. But is it possible to move only one folder with files?
Type: Posts; User: Green Button
Yes, i can backup all files. But is it possible to move only one folder with files?
Hi,
Machine Lynx 2100LYB, Fanuc 0i
What is easiest way to backup folder from CNC-MEM to USB ?
From setting I/O device 17 and using File output we are only able to move programs which is on...
Hi!
Machine: PUMA V8300MR
Software: Fanuc 0iTF +
Tool : Ø12mm endmill
Program is done without compensation. Program is working but form is not correct.
What am i missing or is this imbossible...
Are other M codes working OK ? M03 ?
If so, mu best guess is faulty valve solenoid.
Look from el-pictures correct valve and check if voltage is coming.
Almost ten years ago, so i dont remeber exactly but:
In parameters there was page "Thermal deviation comp" where you can change yes/no condition
We dont have that machine anymore.
But like fordav11 wrote, all timers can be found from ladder.
Also, i do remember that there were some notes on Mori book about timers ?
I also strongly suggest...
Thanks, we'll check connections.
Hi!
Macturn350 OSP100
We have alarm:
811 Alarm-P FCP IO link communication error 106088801
Sometime alarm will be away for days, sometimes many alarms/ hour. Alarm appears during automatic...
Software for example:
https://cadem.com/free-dnc-software/
Cable:
The GE Fanuc CNC controls Serial Cable Connection
It works just fine with usb-serial adapter (OSP100, OSP200)
First of all , you need to have correct cable. This is 90% reason for problems....
UPDATE:
Thanks for tips.
New pulse coder and problem was history.
BTW..Okuma's spare parts pricing is terrible...over 2k€ for pulse coder is criminal.
UPDATE
We cross change MIV unit and 90% sure its pulse coder.
Thanks , i will check connectors
Hi,
Macturn 350 OSP200
When powering up machine gives error:
851-41 ALARM-9 MCS Exception processing TBaxis FFFF6CC0 "#9"
On el. cabinet one drive is blinking E.L and 09
Drive has info:...
Hi!
Lathe: Chevalier FCL 2480 F
Fagor 8055T
We have 10 station turret installed on lathe. We have 11 tools on job so we have to change tools by hand to one turret place.
So in turret place 9 we...
MPG was faulty, new one was not expensive and machine rocks again.
Thanks for help,
GB
Hi,
Pulse wheel works ok to - direction, but when rotating to + direction movement is not smooth, machine stops suddenly and then starts to move again.
Position is ok but movement is not...
I'll bet for Daewoo Puma 8
Found answer:
max= recorded value
L1= % for warning limit
L2= % for break limit
AIR= time in seconds how much tools not to take load. If exceeded tool broken.
Hi,
Little problems with tool load monitor and explanation of symbols:
I manage to record tool load to table.
For example:
Main Spindle:
MAX L1 L2 AIR
60 5 10 05,0
Hi,
New lathe and new Fanuc + sofware....
We are trying to do program simulation.
Already found where blank measures are put but could not found where tool measurements are placed ?
(Tool type...
Machine works just fine and moves ok. It's just bit difficult to drive machine "at night" :)
I try to look all connections but could not find anything loose.
I have to contact Fanuc people to...
Thanks, i will check these
Machine PUMA 240MC-03
Fanuc Oi-TB
After weekend machinde display stays blank. Machine seems to work OK but display dead.
Small fuse checked and incoming voltage 24vdc ok.
LCD/MDI unit...
Designer of this battery system has drinked sake. A lot.
I found instructions here:
https://www.practicalmachinist.com/vb/okuma/osp100e-battery-change-procedure-277828/
Biggest problem was to...
it's U100L
Model year:2003
I have not found battery info page on OSP100 ? Which parameter page is it ?
Thanks,
GB
Hi,
Machine Macturn350 OSP100
4035 ALARM- D Memory board/battery change 2
2) A a certain period has passed since the software was initialised installed
Has anyone instructions for this? Is...
Time really flies,i have sold that machine but
still remember it for a handy one.
Now,when you can lock your machine
you should also start to use graph/ simulation
function.
Do program-lock...
Hi,
Machine:Doosan PUMA 2600Y II -2019
Fanuc 0i-series
When driven tools are used there is spindle load meter (s2)
Blue, yellow, and red area
I do remember that in blue area you can be all...