Search:

Did you get this fixed?

HI Guys,

Have had my 1200x900 laser cutter now for about 7 years.

Its been running pretty solid throughout the years.

I am in Australia and near the power plug there is a safety switch. This...

Hi Machine has been working well for a long time now.

Not sure what has promoted this error.

I can move the table down but when I try to lift the table up its triggering a Trigger Limit Error....

How can you trial software that requires a dongle to
Operate. Your choice is going to be very interesting.

Just a question?

Have you used this system?

Does Rdcam have ppi?

I am very surprised you can cut 12mm mdf at 90% power on an 80 watt reci.

I have air assist as well and I am running a 15cfm compressor which runs through about 9 metres of

hose connected to...

Go with G.WEIKE MACHINE.

They don't use moshidraw.

You have cheap chinese laser cutters and then you have the decent ones.

Its where I purchased mine from and Lucy is simply brilliant.
...

I have a similar lens set up.

I suggest you attempt to try to cut a piece of 12mm mdf again with your settings.

You may find the settings you need might be different,

You may need to...

Really?

Well I Just tried this and was not able to cut through 12mm mdf using your settings.

The speed was set at 4.

I own a 1200x900 powered with an 80 watt Reci.

Anyone else want to...

Where I can control it where possible I would not buy anything that requires a dongle.

Your only going to be doing 2d work which are line cuts or engraving. Lasercad is awesome, not buggy,...

Good thread. Good info.

Could you please share your settings and how many passes did you make?

Great choice.

Get the more powerful extraction fan they sell not the standard blue as well and I have sent you a message.

;)

The leetro is fantastic I agree.

Hi,

If anyone out there has converted a machine like mine to AWC608 and would like to share some info please let me know.

If your in Melbourne, Victoria and interested in helping me out pls...

Does anyone have a photo diagram of the 6515 and the upgrade go the aw608?

Great Thread.

Good Info.

Hi I am interested in changing controllers to the AWC608.

I want to be able to control the laser pulses hence why I am interested in this upgrade.

Has anyone done this and is it easy? Is there...

Hi,

I purchased a cnc router kit here in Australia and a drawing was supplied how to wire up the limit switches.

Machine has been built.

I installed the mach 3 config file that came with the...

Hi as long as you have booked a Truck with a tailgate lift you will be fine. These trucks have pallet jacks on board to move the pallet from the truck to the tail gate to wherever you want it moved....

Hi just take your time and don't expect much from your machine. What I mean by this is don't compare your new machine with others. Its a great unit they work well. I am still learning mine. Sometimes...

Thanks for the replies.

I am running a 14 cfm belt drive compressor. My machine came with
A hailea pump that pumps at 200 litres per minute. My thinking is
Will a hailea awurium pump that pumps...

Any other ideas?

Fantastic Choice.

Can't Go wrong. Lucy is absolutely brilliant to deal with.

Your in for a learning kerb if you have never used one so be patient.

Money well worth spent.

Joe

HI there,

Just wondering which compressors people are using for laser cutting?

Your input would be appreciated. I am running an 80 Watt Laser Cutter.

Thank You

Joe

I have changed my lense to 100mm.

I also changed the nozzle to the one that was provided for the 100mm lense.

From the top of the lense to the material surface this is measured at 100mm.

I...

Hi Guys a printer driver is under development and may be available within 4 to 6 weeks. This driver wil work with leetro boards I think.

Thanks

Joe

Like which ones? ;)

Interesting thread.

I removed my air assist and attached it on the outside like Rodneys using the compressor supplied by Gwieke.

I used an oxy brass tip which I cut and converted.

I could...