Search:

hello,
can you try for 30watt fiberlaser,
10% of power, 50khz frequency and speed around 2000mm/s and play with these, as for line intervals like 0.05
thank you.

as far as I know Rofin always was using VLM - VisualLaserMarker
software looks like this
https://www.youtube.com/watch?v=ucbLHsFd_ow
2007 so version 4.00
rofin laser always had own computer and...

ebay - look for rofin f20 - used to be over 50G a piece; is offered for 7G now.

gmail me at
artolin77
I will provide you info, you can always dismiss it, but you will see it will help you.
Kind Regards.

unstable level of power from laser source way above 5.00% with the combination of low resolution optics/lenses 100um and above installed in the machine. Kind Regards.

"non-metal materials like wood, acrylic, paperboard, leather, denim, and other materials" in laser co2 technology and non contrasts marking world are simply called organic materials

and what is...

set up google voice, you will be able to disconnect it and provide it here I will call you and provide you explanations and routes.
After I did research on your set up it is not even what I was...

If you graduated from K40 I kind of doubt that you have 80W galvo laser, from my understanding, on eBay CO2 galvo made in China - do a search - galvo co2 - are 10G for 30W, and 12G and 19G for 60W...

this is your answer

https://www.youtube.com/watch?v=zOOkh7QcXv8&t=21s


Kind Regards.

Nothing's wrong, HAZ - heat affected zone, wrong laser to wrong material, if this is metal, too much power on the martial,
in order to lower the problem, either lower power, but it still will be...

maybe this will help you
https://www.mecco.com/blog-can-a-fiber-laser-engrave-wood
Kind Regards.

you are mixing laser souces ( fiber, co2, etc ) with engineering or build of the laser marker, I understand that you are looking into galvo lasers - fiber laser galvo. So look into co2 galvo laser as...

quote: I'd like something I could experiment with a variety of mediums on; stone, glass, leather (marking), perhaps light cutting of paper/sticker cut-outs." : - these are organic materials. you need...

no fiber laser will work on wood, wood in an organic material , only co2 lasers will mark - organic material. this in the video is galvo co2 laser.
Kind Regards.

if you know what you do and material plus high quality laser you don't have to clean your work please look at the wood engraving and there is no burns no tape needed no postmarking work needed
...

buy yourself state of the art keyence co2 for all organic marking
please look at the quality of the work
https://www.youtube.com/watch?v=J4Ij4362gUc&t=516s



Kind Regards.

NO,

https://www.synrad.com/en/home

look at the metal containers in the picture, this is how low wave frequency co2 tubes with circuit boards are packed there is no way that you are able to...

low wave frequency CO2 is stored inside glass tube and is started to leak - gasket problem - if you would have it in metal compartment like synrad or keyence it would last for 20 years, any way if...

https://www.i3detroit.org/wi/images/d/d6/OPERATIONAL_MANUAL_OF_MACHINE_xin_USB.pdf

https://www.ebay.com/itm/153734136465
for 2200.00 will meet your needs

because you will not need trotec - 10 times more expensive
https://www.ebay.com/itm/333215073977

and I suspect you are...

And what kind of a laser did you buy from Automation? How much did you pay?
If you decide to sell your laser and that will make you a seller, in what bad light other supposed to see you, I quote you...

how much do you want to spend? From what I know if you are looking into G-WEIKE 40w cheapest is 1400.00 plus shipping from china plus 30% duty and taxes and fees that will be into 3000.00 for sure...

I have been at Automation technologies Inc., - mostly empty warehouse - very remote location. I assume from your question that you will be looking at CO2. I really doubt that Automation technologies...

yes, how to contact you. do you want a manual.

https://cdn.shopify.com/s/files/1/1366/0335/files/EZCad2_user_manual.pdf

manual page 68-69
Thank you.

https://www.youtube.com/watch?v=UQ5o0k2kOb8
starts at 45seconds 0:45 OR
https://www.youtube.com/watch?v=Ltmbnnu88kE
what you need is 10W - 25W usually doesn’t matter if the laser will be...