Hi again
Sorry for replay again.
I found another picture that have better qaulity (please see attached picture).
...
Type: Posts; User: sml2010
Hi again
Sorry for replay again.
I found another picture that have better qaulity (please see attached picture).
...
Thank you so much John.
This is a great help.
Hi all
I have a electronic memory board (sinumerik 850m CNC machine) that don't have battery and capacitor and I don't have any information about the battery and capacitor but fortunately I found a...
Hi kstrauss
Thank you for reply.
My meaning was to know the majority using of metric and imperial unite in Canada? Specially in industrial engineering field?
Hi
I 'd appreciate to know about unites in Canada.
Does The industrial companies use Metric or inches unite? My meaning is on calipers and micrometers
Thanks
Hi
I have a Cylindrical Grinding machine TOS HOSTIVAR, and I have a problem on OD grinding , problem is that during the grinding I have in feed grinding of wheel into my worpiece and make my...
Hi
Any body know Mcode for 4th and 5th axis Clamp and unclamp ?
Thanks
Hi
I have stop on postion for feedrate more than 2000mm/min on 3D surface by my seikos 18m
Is any gcode to have more smooth motion on hitachi seiki milling machine?
Hi
Can some one help me to change the languge of my hitachi seiki machine (seicos 18m ) from germany to english ?
Thank you
Hi
Can some one help me to know , what is the part that shown in the attached picture?
Our second hand hitachi seiki machine doesn't have this part but the electric cable and hose is there.
Hi
I see that some Company use a white color powder for packing the metals in order to prevent it from oxidation during the ship time or store time before customer use.
I think it is a moister...
Hi
I weld(TIG weld) two Stainless Steel (422) work piece with each other in different diameter , one is 300 mm and another is 50mm and then i turning this part but the welded zone is harder and...
Hi
please see attached drawing.
It is a seal ring that split from center, i machining this part with my CNC lathe machine by this method :
1- Cutting a ring from a plate ((ST37...
Hi
I bought a CNC lathe(Heid Magdeburg with Siemens 802 controller). it is a CNC lathe with box way.
i don't know why i can't take a good surface finish with this machine, I am skilled in...
Hi
Does any one know, is it possible for Mastercam an option to know amount of backlash in CNC machine to compensate it in the position of G code?
Let me know more
Thank you
Hi
I want buy a CNC Lathe machine. Can you please help me to know what parameter do i check in order to know does it good machine or not?
Can you give some good information or a good article...
Hi
I have a CNC lathe with Sinumerik 840C , and i want reduce the spindle speed of this machine by change of the machine parameter.
Maximum spindle speed of this machine is 4500 RPM and when you...
Hi
I have a Spinner CNC lathe machine but i have problem to send my program from my PC to Machine
This machine have two port that both are the same but once with 24V and another with MPI label...
Hi
I have acnc lathe machine with slant bed . I got face machining of a part with 350 mm on diameter when I put dail andicator on the other part of workpiece it show 0.06 mm runout but when I check...
Hi
I need to use this fixture(please see attached picture) for machining some cylindrical Aluminum part by my CNC lathe machine
the biggest diameter of plate is near 500 Milimeter with 20 mm...
Hi
I want to know: with what parameter i can change the amount of zero machine point?
Please let me to know : with what parameter i can change the amount of reference point too?
Machine is a...
Thank you for your answer
Does all CNC tuning machine's tool zero is on the machine zero for the x axis?
with any turrets?
279300
279302
Sorry i think i write this problem on wrong tab
Hi
I am new in CNC lathe machine. Please help me for tool offset setup: I have 3 tools
1- Roughing tool
2- Finish tool
3- Drill tool
I got the G54( zero offset ) with roughing tool and...
Hi
I am new in CNC lathe machine. Please help me for tool offset setup: I have 3 tools
1- Roughing tool
2- Finish tool
3- Drill tool
I got the G54( zero offset ) with roughing tool and...
Hi
Please look at the attached picture.
I want have this shape in the Solidworks parts so that I be able to change the size of blue, red, green and black lines with a chart and no dimension appear...
Hi
Please see to attached picture.
I want to have a sin curve that be only in one direction not in both (- and + direction), in the Z axis but when i wrote it with ABS function, solid works...
Hi
I am new in solid works analysis.
I have a frame and i want to know does this frame are good enough to bearing 300 kg force without problem or not ?
Please see below video:...
Hi
I draw a 2D sketch that has more than 2400 lines and spline.
I get an expert for another software but splines are not with high quality when i get save as by DXF or DWG file format, it is...
Hi
I have a 3 axis milling machine with Fanuc 10M controller.
this controller is old and i can't send very complex shape because of low memory capacity.
Does any way to make the memory...