Thanks warrenb, I totally understand what you're saying, I prefer to just leave the post alone---been burned in the past.
I do have to start somewhere and your notes are strong start indeed!
1...
Type: Posts; User: PRINT_FX
Thanks warrenb, I totally understand what you're saying, I prefer to just leave the post alone---been burned in the past.
I do have to start somewhere and your notes are strong start indeed!
1...
Hello,
I'm looking to buy a right-angle milling head to use on this horizontal mill. I do have a few questions on how to add tool and program it with Mastercam (fully licensed);
1 - can I...
Hello,
I thought I had a parameter to make the machine going to home position before tool change. Even when calling Tx M06 on MDI. I know that I can accommodate the program to do that.
...
I can handle it indeed---is just, doesn't make sense the low rapid feed VS the 25%/50%/100% which only have one parameter, that is all.
If this machine is designed for a production...
too funny!!!
I decided to look up the boring book and couldn't find any parameter info for the low---its a default setting. which is dumb!!! always thought Japaneses were a little smarter LOL
You are right bill4807. there is no parameter for the "low"
Sound odd, thanks bill4807, now I know.
Thanks drdos, works like a charm now...
I was just wondering if there is a separated parameter for the "low" I basically wanted to increase the low feed...
cheers
P_FX
Yes, there is low, 25%,50% and 100% but the low is way to slow and the 25% is way to fast for 25%---this machine is crazy fast and I'm already seeing people crashing it big time. Have you seen a...
Hello all,
I have a Robodrill a-D21LiA5 with Fanuc series 31i-model B5...
This machine is crazy fast and gets dangerous to run specially when we do a lot of one offs.
What parameters can I...
Thanks Heavy_Metal
What I don't like about the G95 on this machine is, the single block works a little weird, it stops in every single cycle. It stops at every peck.
It got to be a parameter to...
Hello all,
I can't seem to figure out how to peck tapping on the robodrill Fanuc a-D21L iA5 control.
my other Fanuc does pecking tapping with G94 M29, with PITCH X RPM = FEED...
but on this...
Hello,
How can I generate a N10/N20/N30 before each operation?
also, a space between operations.
see example below... my other post generates N20 before the second operation.
M09
M05...
Hi the_gentlegiant,
This is a huge Milling Horizontal table/table configuration, I love this machine, I've been doing all kind of crazy stuff on this...from 1.5meter diameter vessel ball with 264...
Hi the_gentlegiant,
It works indeed. I just tried it with a collet holder and works good, it just leavs a tinny damage to the insert because of the "lag"... I might need to play around a little...
nice!!! and, yes, these inserts are driven into a drilled hole and cutting their own threads in the process.
I'm ordering a tension/compression collet holder tomorrow---I was hoping that I could...
much appreciated the_gentlegiant,
These guys are self threaded inserts for plastic, lifting points. The internal thread is M8X1.25 and the outside is a m12X1.75. My machine have some extra modal...
Is it at all possible to write a custom tapping cycle to feed in at one pitch (thread the insert in the part) and feed out at a different pitch (unscrew the drive from the insert)? machine Toshiba...
Yes, that is exactly the problem---bad designing, no play. I'm making a drive myself for this application.
[/QUOTE]i hope this is usefull / kindly :)[/QUOTE]
Thanks, much...
Hi,
What do you mean with a clutch? Can you give me an example? I’m using a drive tool in a collet holder. —-it would work indeed with a different drive tool which the supplier doesn’t make.
It...
hello all,
I'm trying to use a milling machine to insert Self-in tapping threaded inserts--- The tapping cycle doesn't work because during the return it bring the insert out of the hole.
using...
Thanks!!!
cheers
Tony
okay,
I was able to run the program with the copy function from USB to /user, I don't remember anymore what I did...
can you post on here the step by step on how to download a .nc program from a...
Hello all,
Anyone would post the step by step on how to download a .nc program from a USB to the memory of the machine?
And, how to run from the USB directly.
control, Fanuc series...
Hi guhl,
P + CAN doesn't work... it seems the B-axis know where the over-travel point is on the opposite direction but it alarms still the 411 servo alarm before the reference point...
do you...
Hi,
my 5-axis machine dosen't want to reference--- it gives me the 411 servo alarm: B axis excess err... after I reset it, I can move the B axis to the opposite direction and if it goes too far...
Hi all...
this morning my 5-axis machine didn't want to reference--- it gives me the 411 servo alarm: B axis excess err... after I reset it, I can move the B axis to the opposite direction and if...
Hi all...
this morning my 5-axis machine didn't want to reference--- it gives me the alarm 411 servo alarm: B axis excess err... after I reset it, I can move the B axis to the opposite direction...
Hi Everyone,
I have a brand new haas tl-2 with no turret, as you may already know, using the default tl-2 post mastercam doesn't generate the proper code, the X values come up as mirror.
I'm...
Hi Everyone,
I have a brand new haas tl-2 with no turret, as you may already know, using the default tl-2 post mastercam doesn't generate the proper code, the X values come up as mirror.
I'm...