Yes, I added a Sherline rotary table for small work. It was a matter of getting another plug for the second table's stepper motor so that it could plug into the OEM port. And I have to change one...
Type: Posts; User: TXFred
Yes, I added a Sherline rotary table for small work. It was a matter of getting another plug for the second table's stepper motor so that it could plug into the OEM port. And I have to change one...
That's a very interesting idea. Where are you located? I'm in Round Rock, TX.
I can't PM you, your account is set to not allow private messages. But I think that if you PM me, it'll allow me to...
They're valid points. But the problem is that to use the Tormach manually, I have to keyboard jog it or spend time with Mach wizards. And while I've programmed for CNC in the past, I'm out of touch...
Hello all. It's been a long time since I've posted here.
I'm planning on selling my 1100. Life has moved on and I haven't given it much use lately. I think I'd be better off with a manual mill...
A few years ago, I wrote a program in Sprutcam 7 to engrave my initials onto a shot glass. If you're interested, video of the operation is here. https://www.youtube.com/watch?v=HOiBB3xEphk
I...
You can see my labeling system in this thread.
http://www.cnczone.com/forums/tormach-personal-cnc-mill/150673-tormach.html
I set up each tool in the Sprutcam library, with feeds and speeds...
Thanks for the pictures.
What pump did you use?
Do you mind detailing the modifications that you've done?
I've already upgraded my return system to use a 1" hose from the pan to the tank, so I'm in good shape to upgrade the pump as well.
...
It it helps, I used this switch to add a second E-Stop to my Series 2.
http://www.automationtechnologiesinc.com/products-page/cnc-parts/e-stop-switch
I looked into this when I thought I had a bad ballnut. The ball returns aren't removable. They're closed off by a couple of pressed in plugs. If you could find a way to remove the plugs and...
I've done this once.
I did it by offsetting the toolpath horizontally and vertically by the same amount. For example, offset .050" out, and .050" down.
However, no chamfer tool is perfect,...
I didn't know that you were drag engraving. I'll bet you a large amount of money that your engraver has worn to the point that it's got some sideways movement.
Put an indicator on the engraver...
The gibs don't adjust backlash. They shouldn't affect backlash unless you have them too tight, in which case they will induce backlash.
Try loosening up the gib and rechecking backlash.
Then...
I see two possibilities.
1. X axis backlash. However, tmarks makes a good argument against that.
2. Slop in the spindle, causing the tool to move slightly under cutting forces. This could...
Bump. This is still in my garage and available for sale. Price reduced to $300 + shipping.
Hopefully I'm not breaking any rules by posting this.
A few years back I made a small production run of lathe tool holders that were designed to fit a 6" vise. I closed my machining business and...
It would be a whole lot easier to just get a quiet air compressor. I have this one, and it's nice and quiet enough to talk over.
Plus, compressed air is very useful around the shop.
California...
Thanks Bevin. This improved the system's stability significantly. It still crashes, but not as often as it did before.
Are there any other configuration changes that I should make to help...
I had the same problem, and Tormach gave me the answer.
The Power Draw Bar board has a mechanical relay on it. This relay is used to trigger the door switch circuit. Whenever the drawbar fires,...
Bevin,
Thanks. Is there a location where I can download older SprutCam versions?
BTW, I last night I downloaded and installed a 30 day trial of SC9. It crashed as soon as I launched it and...
I see, you're after the code that operates the ATC. From your original post, got the impression that you wanted to use some of screen elements (buttons and images).
As you say, the Tormach ATC...
You can download the version of Mach3 for an ATC from Tormach's website. That will give you a copy of the two ATC screens that you could work with.
I'm currently running Sprutcam 7 Build 1.6 Rev 64105 (the latest version) running on Windows 7 Professional Service Pack 1. I haven't done any CNC work for over two years, and I'm now getting back...
The stepper frequently misses steps or binds up. However, it turned out to be an electronics problem. I had cleverly installed a network card in the computer, and it was interfering with the...
Is it possible to disassemble the ballnut and reassemble it?
I've got a sticky X axis, and I've cleaned and adjusted every part of the mechanism except the ball nut.
Frederic
I've solved this problem, and in the process I've learned a few things about the oiling system.
It turns out that the oiler was working perfectly. The front X dovetail has TWO holes drilled in...
My mill has sat unused for two years. I'm resurrecting it now and need some help.
I've cleaned the oil system by flushing with WD-40, cleaning all of the oil lines by threading heavy fishing line...
I'm updating this thread to share some advice on what not to do.
I attempted to clean my orifice valves by soaking them in carb cleaner for a few days. Unfortunately, the check valve inside has a...
To my shame, my 1100 has sat unused for two years. I recently drained out the old Blasocut 2000 Universal coolant. After two years of sitting, it still smelled OK.
It sounds like you have multiple problems, and not all of them are ATC problems.
First, I am surprised you say that the valves on the actuators don't have locknuts. Mine has knurled locknuts on...