Adding the incremental G18 block solved the problem and the parameter#1022 is set to "5" meaning "parallel to X"
G98 (IPM required for G7.1)
M21 (get into C-axis mode)
...
G1 X.500 F200
G1...
Type: Posts; User: Rich L
Adding the incremental G18 block solved the problem and the parameter#1022 is set to "5" meaning "parallel to X"
G98 (IPM required for G7.1)
M21 (get into C-axis mode)
...
G1 X.500 F200
G1...
Folks,
I have a Fanuc 0i Mate TB gang tool lathe with full C-axis capability and I'm running into a problem coding up some circular interpolation codes (G02) within the G7.1 cylindrical...
Go take a look at:
LinuxCNC.org - G Code Overview
excerpt:
" ... The EMC2 G Code language is based on the RS274/NGC language. The G Code language is based on lines of code. Each line (also...
Excellent TXFred. It's good to see folks take the time to thoroughly answer a question. I know I appreciate that when I ask something.
OT - By the way, a theorem is a mathematical statement that...
Thanks for the indications it should work. Admittedly, I haven't quite tried it yet but I do wonder about the two consecutive warnings I've gotten here about overtravel. If the profile causes the...
I'm pretty new to G-code programming and I have a question about G71 internal profiling using a gang tool lathe. My control is Fanuc 0i Mate TB.
All of the descriptions I've seen show a left hand...
Folks,
I'm new on this forum and I'm also new to a recently acquired gang tool lathe with a Fanuc 0i Mate TB control. My question has to do with the program files that are on a CF card. The card...