Search:

mluqman · 12-08-2022, 11:36 AM

Hi, Do you still have this kuraki?
I lost parameter on this kuraki unlucky I don't have backup keeprelay, timer and counter. If you don't mind to share these parameters, thank you for your kindness

mluqman · 03-23-2022, 08:33 AM

Hi, I have problem with KURAKI milling with 3 selection spindle gear (low, medium, high) after loosing the Parameter, luckyly still have NC Parameter backup but PMC Parameter (keeprelay etc) don't...

mluqman · 12-29-2021, 06:56 AM

Hi, we have Kuraki with fanuc 15-mb, no need to key in IPL password, all done : machine parameter loading already but unlucky we don't have backup for PMC parameter, anyone could help me who have PMC...

mluqman · 07-03-2021, 08:46 AM

Hi, I have same issue, want to retrofit our toshiba bm 80e but the servodrive, motor want to keep. You start to upgrade or not?. Please share it. If you have schematic diagram of servodrive I...

mluqman · 04-23-2021, 08:59 AM

May ask you regarding G84 (Rigit Tapping).
Before our Kuraki Fanuc 15M loss the parameter the tapping G84 could run smoothly but after loss the paramater (we dont have backup, ask the CNC service...

mluqman · 02-27-2021, 12:03 AM

Connection diagram : input and ouput

mluqman · 02-27-2021, 12:01 AM

Hi, anyone have experience with axis drive of toshiba bmc 80e, we need wiring diagram for this drive (type: AH561-F)

mluqman · 02-23-2021, 04:54 AM

Case close, the io at control panel defective
thank you to all of you

mluqman · 02-18-2021, 10:38 AM

I shutdown the machine and ON again after that the alarm PC050 IOLINK ER1 CH1:GR00:03 not appear anymore (like normal booting) but alarm display in the following

OT alarm
Turret alarm
Emergency...

mluqman · 02-15-2021, 06:57 AM

What does it mean?

mluqman · 02-15-2021, 04:49 AM

Hi, we need you help to solve my problem on Fanuc Oi-D alarm "SYS_ALM197 EMBEDDED SOFTWARE SYSTEM ERROR" suddenly appear after about one hours running. Attached are the picture of alarm

mluqman · 01-05-2021, 02:08 PM

Hello,
I need your help, we have fanuc 15M (kuraki) just restored the parameter, all function properly but only one problem on display when we button [PRG] the servo error display appear (only...

mluqman · 01-05-2021, 01:30 PM

Hello,
I need your help, we have fanuc 15M (kuraki) just restored the parameter, all function properly but only one problem on display when we button [PRG] the servo error display appear (only...

mluqman · 10-22-2014, 05:01 AM

Hi, I have fanuc tape cut series 360 got hang problem where when booting CRT display' fanuc tape cut series ..series 360-07' after that stay there only. Maybe someone could help me

mluqman · 01-30-2009, 01:41 PM

Hello, FYI this link maybe useful for another Fanuc LAdder FAQ http://cncfanuc.blogspot.com

mluqman · 01-30-2009, 01:36 PM

Hello, maybe this link could be useful for Ladder III FAQ http://cncfanuc.blogspot.com

mluqman · 01-30-2009, 01:34 PM

Hello, may this link could be useful for another Fladder FAQ http://cncfanuc.blogspot.com

mluqman · 01-30-2009, 01:18 PM

Hello, is this error come out after CNC turn on or when moving?
if this error come out just after ON, suspect the problem from your ServoAmp
(assume A-axis and B-axis in one servoAmp). If One by...

mluqman · 01-30-2009, 12:43 PM