Picked up one of the floppy emulators that allows you to use an USB drive in the older Haas machines that originally came with a floppy. Having trouble with the software that came with it. It is...
Type: Posts; User: JasonR
Picked up one of the floppy emulators that allows you to use an USB drive in the older Haas machines that originally came with a floppy. Having trouble with the software that came with it. It is...
We recently had to replace the X axis servo motor on one of our VF-2SS machines. We have the unit that was removed and I am wanting to send it out to be repaired. I have 3 VF-2SS machines and from...
We have two VF-2SS', a VF-0E and two VF-0's. We machine 99% aluminum so the SS' give us a benefit. We run them 18hrs a day 7 days a week. Perform very well. For what you wanting to run it sounds like...
I have bought 6 used Haas machines in the last few years. What the previous person said is pretty much spot on. Low hours don't mean a thing if the machine was run hard. Overall condition, paint...
We are looking for a couple used Haas machines. 2000 to 2003. VF-0, VF-0E, VF-1 or VF-2. If you know of any shops that are selling any we have cash ready to purchase. We are not machine brokers. We...
PM me your email address and I'll save it as a generic .eps or .svg and send it to you.
J
You should be able to import the .cdr file into adobe illustrator.
I am running 3 of the Glacern 6" double vises on my VF-3.
http://i144.photobucket.com/albums/r191/Renschler/6receiversetup.jpg
They were considerably cheaper than the 6" Kurt double vises. So...
After getting fed up with the amount of coolant that was constantly raining out of the large opening in the top of my VF-3 I decided to make a custom top cover / splash guard. My VF-3 is a 2000, not...
Thanks for the reply. The Glacern barely fit also.
Keep an eye on Ebay and craigslist. I have purchased 4 used Haas machines in the past 3 years. 1 was from a used machine dealer. 2 were from ebay (1 was a broker and 1 was a shop) and one was off...
Anybody using a 6" double vise on a VF-0? Was looking at the GMT 6" double vises and was wondering if anybody had used them. It's a 2000 VF-0 with the standard travel, not the VF-0E. Just wanted to...
It does appear that the issues are related to the encoder. We had replaced the encoder and motor with a supposed direct replacement unit from Potomac Electric and had lots of issues getting it to...
Getting an Air-Hot alarm when connecting my HRT-210 (brush) to the servo controller (red brush style controller) Unit is cold has not run in days. Has 85 psi CDA going to the unit. HRT-210 will run...
See above
Yes it is the first time trying to connect the indexer to this machine. I have been running the indexer with a servo control box on my Mini-Mill up until a week ago. I even hooked the indexer back up...
156 A AXIS Z CH MISSING
Getting this alarm when trying to home my A axis. Machine is a 2000 VF-3, indexer is an HRT-210.
The alarm description says it can be a bad cable, bad encoder,...
Looks like it should be good to go with the brush style indexer.
Thanks again for the replies.
http://i144.photobucket.com/albums/r191/Renschler/AAxis.jpg
Thanks!
So if I understand what your saying. If I have the big single connection and I am physically able to connect my brush style indexer to the cabinet then I am good to go? I hope so because I do believe...
Hello,
I have an older HRT-210 indexer. Brush style.
http://i144.photobucket.com/albums/r191/Renschler/4th.jpg
Recently purchased a 2000 VF-3 and was told it was pre-wired for the 4th axis,...
Got it. Thank you for the reply.
Thanks.
Hello,
I am just getting started with g-code so bare with me. I have a Haas Mini Mill that we have been running an HRT-210 on with a external controller. The code for the indexer to move is an M21...
Must be X5. That's what I have and it works fine.
Jeff,
Thanks a million.
J
Hello,
I am looking for a clean vector image of the declaration of independence.
Working on a piece that I am going to do on a sheet of leather. I have a 45w epilog co2. I primarily use coreldraw...
Are you sure you have macros enabled on your machine?
Awesome! Thanks for the detailed reply. I will give that a try. Hoping it is just the cables as you were saying it might be. Thanks again.
J
Have a 2001 Mini Mill that is getting a " No Interrupt " alarm. System shuts down and the control panel is locked. Nothing responds. Have to power down to reset. Manual only says "electronics fault"...