Any tips?
I miss the old software where you could decide what input did what without all this extra stuff.
- - - Updated - - -
Any tips?
I miss the old software where you could decide...
Type: Posts; User: MrEmo
Any tips?
I miss the old software where you could decide what input did what without all this extra stuff.
- - - Updated - - -
Any tips?
I miss the old software where you could decide...
Return distance is set to 1mm. It still goes to z15 before continuing with the program.
Do I need to add something to the macro? I used a postprocessor you helped some other guy with.
With plasma cutting you do this very often to make sure it is the correct height when piercing. A plate can be crooked, it can be a little bit bent, there can be dross under the plate which makes it...
If that would be under "Probe & measure" then that does not work.
Is it possible to make the measure height process go faster?
I have Z safe height set to 15, and whenever it probes it returns to 15 before continuing with the program. I would like it to go...
So what am I doing wrong? Limit switch 4 is triggered, settings is saying trigger estop. Nothing happens, machine continues running.
...
Same profile I sent you a week ago.
Doesn't work.
Emergency stop, limit switches x y and z. Fallof switch for Z. Neither does work, but I can see the buttons are triggered in the software.
I am not arguing? I just said that the Z measure code does not work anymore. It has however worked since 01.05.21 when I last updated the software/hardware.
But as I am trying to say, this does...
Yes it did work. It has worked for 2 years, I have cut several tonnes of steel with this code. I have thousands of Gcodes running with this exact code.
I have now done a test and removed it and...
It does and it works. :)
That code has worked like it should for 2 years. These problems occured after the last firmware/software update.
Do you have a archive with older firmwares and...
I have sent you profile on email.
The Gcode program does not matter, it happens on all of them.
Not sure what this could be, I booted up my old computer with old software etc, updated that...
I have now tried swapping X and Z axis in the software. Now it is moving the (X) axis like it would with the Z axis. So the error must lie in the software somewhere.
I have tried editing G28 and...
Through ethernet. This has worked flawless for years until now.
Anything on the start from line problem?
The limit switches are working, they are triggered and I can see that the signal is received in the software. But they are not working/stopping the machine.
Emergency stop signal is also being...
I have been wondering the same but I will upgrade to a Masso system very soon. I am not happy with how planetcnc have been updating and working with their software/hardware.
- - - Updated - - -
...
Probably some settings inside planet cnc software then. I am moving away from planetcnc now due to so many issues over the years. Hopefully you are a bit more lucky.
Are you using sheetcam for nesting?
Hello.
Just updated the firmware on my Mk3 plasma table, also installed software on new pc and imported all the settings from the old one I was using. Now I am having a few problems:
Limit...
After updating to latest firmware the jogging with butting inside software and MPG wireless pendant is now stuttering. The motion is not fluid and it is shaking the entire machine.If I send X100 for...
If I understand it correctly this is a script running in the background?
#Oninit means on startup or start of program it checks the value of the input?
#Loop means that the script is running...
Hi.
I have recently added a floating head with a breakaway torch. This is with a pnp sensor which I have connected to input 4. This works okay and the input is triggered when I remove the torch. ...
I've got no idea. I am the only one who uses the machine. But it's fixed again now.
But I have to say it's not the first time around where the software have changed some random setting making me...
Don't even know how to change those settings. :o
But yes apparently after some searching around it seems like the traverse speed had been set to 0%.
Removed all the G00 codes from program and it runs as normal.
Why did the software suddenly decide not to recognize G00 as a code or refuse to move on it? It has been running with same post...
It seems like the software just stops working when it meets the G00 code. If I remove this code the program continues until it reaches a new G00.
Hello.
I've been running the machine frequently and last time was early last week. I powered up the machine today, no changes made in any place loaded some new gcode files. Press start and the...
I figured that out eventually.
Download link is not working?