Hi Planet-CNC,
thank you!
This looks great!
Best machine control and support I know :-)
BR SailnSea
Type: Posts; User: sailnsea
Hi Planet-CNC,
thank you!
This looks great!
Best machine control and support I know :-)
BR SailnSea
Thanks for response!
Yes, any "live" output is set to 0 with Estop, that works fine, but my problem: after cancelling an Estop, the PWM-functionalloty still works as before the Estop, where as any...
Hi PlanetCNC,
the func outpwm() does not work in event handlerexpr.txt on #OnEstop???
(See commet above)
I want/must swich off the PWM-Output in case of an EStop.
Any suggestion how to...
Thankyou PlanetCNC!
I testet the event-handling of func-outpwm() in expr.txt:
Result: It does not switsch off the PWM-output when using in #OnEstop
Expr.txt see below. The print-commands in...
Thanks for this links! Very helpful to solve some ideas on my machine.
But still one problem open: How could I reset PWM-outputs after a EStop-Event. Problem is that the TNG-dutycycle-parameters...
...found it be myself:
https://planet-cnc.com/cnc-machine-semaphore-application-using-expressions-expr-txt-part-4/
Amazing what functions PlanetCNC/TNG offers, but difficult to get all the...
Hi PlanetCNC,
I also would be very happy to use an OnEStop Script. Is this meanwhile available?
I would like to reset all PWM outputs with estop, which is not the case with my current version...
...thanks a lot ==> Works fine! So happy!
Hi community !
I changed the M3-/M4- and M5-scripts to get the Huanyang Converter communicate via Modbus. This does works fine.
But when pressing the spindle button in top toolbar of...
EdingCNC offers a
- Pitch-Compensation-Table
- Cross-Compensation-Table
(See here https://www.youtube.com/watch?v=z56frLx5KO0)
to compensate above described errors :-) ==> seams to make...
Yes,in theory a cnc machine is accurate, in reality there are always small deviations.
For example:
Position the X axis in machine coordinates to position 10, 20, 30, 50, 60 mm and so on and...
Is there any possibiliy to provide a set of calibration data for each axis in order to improve the axis position accuracy. PlanetCNC should be able to use these data to correct the axis setpoint...