Search:

I have bought lots of different kinds of stuff that just hasn't worked. I'm looking for the clear flexible pvc stuff that you attach around your dust boot. I bought some stuff was that just to hard...

Thank you for the post balloonengineer. Ive been confused between artcam and artcam prem. Wasnt sure thta 3g will scare you. Im really going to start trying to do some artcame. 360 a year isnt...

Hey Jasonx10. I’m in your same boat but I’m a little further on my machine. I spent a year or two building and playing with a Solsylva CNC Plans (all wood, with ball screws/there is a rack and...

Yeah that one is no fun. Definitely losing steps. Do some research on these forums I believe I seen the same issues happen. That would be better than me trying to lead you wrong.

Do you have a Mach 3 or 4 Setup on your CNC computer that runs your CNC? Most of the time you need to use Artcam to out put a G code. Use Mach three to read the G code. All machines are different...

Yeah they were smooth. Very little sanding required. I also have an air blower on it now that blows away the kerf when i do this. Makes the bits last lot longer. CNC carbon fiber is tough because...

Hello all. I have a dust collector mounted on the wall to the right side of the garage. I was just curious to see what people do to get it where you want. Should I start with some PVC and move it...

I have cut carbon fiber for a quad copter on my machine. Even cutting 80% lowers. Just for myself FYI. I'm about ready to post a video on the 7075 aluminum cut. 5/16 Bit 1"3/8 Cutting Length, at...

Great machine i own one as well. I had my own spindle set up and control box set up though. I still based it after the G540 so it was easy to convert it. Ive been extremely please with the accuracy...

Hey thanks for the info i have been playing with it a little and i have found out that the adaptive pocketing on fusion does well with .25" down and load it up to .025. 2 Flute at 15 IPM does well. ...

Great job i can tell you are spending some time. When i built mine i swear i built it 3 to 4 times. Got tired of cutting wood twice and having it short :p. Work even had a manual mill that i cut a...

Awesome. Perfect timing to read this. I have been cutting some 80% lower on my Pro4848. Im not sure on the different grades of aluminum(currently looking them up). From what i see the 7075 is a...

I would be curious to hear youre fix as well. It seems like my machine needs to sit and warm up a little to before i can start jogging it. I have the CNCrouterparts Pro4848. I did not buy the G540...

Thank you CoAMarcus for the reply. Yeah be nice to see that update on there because i am not the only who who has bought off the shelf DB9 Cables for this that is how i found out the mistake i made....

That has to the be the issue. 23% of the voltage goes into that wire i think after a while the G540 took it. My fault for not using the right cord awg.
3.5amps at 48 volts across a 25 ft cord at...

Here some pictures

CoAMarcus - Thank you so much. I didnt realize you guys did repairs. Unfortunately i just bought an other one. Hmm im going to have to try this and see if i can send the other back. Good...

Okay im starting to think my G540 is dead. Barely reaching 2 years and barely used because most of this time i was building and not running it. Any one else had your G540 go dead(nothing hooked up...

All right need some help here and see any one else here has had this problem.

Was running my CNC in manual and cutting my spoil board. I could tell the machine was getting delayed after i put in...

What speeds and feeds did you run that worked best for you?

Hello all. Almost got my machine up and running and was going to just use my older mechanical switches but since i have the Pro4848 and it is designed for these sensors im really curious. First of...

thank you for the reply, i feel i got it to about 1/32

Still looking to see one? Live in Wyoming just across the Utah border. I built a Solsylva from David Steele to get my head wrapped around the CNC world. I regret not buying the big dog off the...

Im currently building the base of the Pro4848. I was wondering how precise should i square it. From corner to corner? Looking for tips and tricks to get it the best i can. Great machine, im...

Any one be interested into buy one or just parts off of one, not sure if i can unless you purchase his plans? I know the wood inst worth much but i do have some double threaded precision rods from...

Hello everyone not a good day so im hoping i could get some help. I have the 2.2 KW spindle with the corresponding inverter from Huanyang inverter. Had it all hooked up running good but i noticed...

I have the G540 im wanting to know whats the difference from using Mach 3 motor tuner compared to using the G540 and getting a screw driver and tuning it with that. Does it make a difference?...

Thank you Ger21, kinda thought that but wasn’t sure, I heard you’re the guy to talk to about motors and acme rods? Mind if I ask you a few questions? A big one came up today and am currently in the...

Tried to look up the difference in ACME lead screws on why you would go Steel or Stainless? No success so that’s why I’m posting here. If anyone has some information on the differences as to...

Thank you Carveone for input, let me tell you what i have planed so far, and get further input if you would kindly share.
Planning on building the gantry and carriage out of aluminum with the bottom...