Search:

When I press page up the z axis will go up or down and if I press page down it will go either direction. Hopefully someone can help with this issue.

I have not measured for backlash yet but everything is coming out with great tolerances as far as I am concerned. It is a pretty good design I feel and having the carriages spring loaded really...

Machine is up and running.

That is what I used and it works good with 3m tape. I got mine off Ebay from StencilShack and need more but he hasn't emailed me back. Good luck.

Some build pictures of the CNC plug, table, gantry, etc....251776251778251780251782251784

Some build pictures of the CNC plug, table, gantry, etc....251776251778251780251782251784

Here are some pictures of the table.251766251768251770251772251774

This may be a better description of the issues I am having. I am planning on using my 42i as a cutter and it running along side a G540, Proma THC and Mach 3. I have the CNC plug that goes into the...

This may be a better description of the issues I am having. I am planning on using my 42i as a cutter and it running along side a G540, Proma THC and Mach 3. I have the CNC plug that goes into the...

I have been building a table for a little while now and am to the point that I was worried about. I have the table built, gantry rolling x/y/z using the CNC software but am stumped with interfacing...

I have been building a table for a little while now and am to the point that I was worried about. I have the table build, gantry rolling x/y/z using the CNC software but am stumped with interfacing...

Thanks for the prompt reply, I will go ahead and put it on my laptop. Unfortunately I am using a MacBook Pro so I still need to install Windows 7 on BootCamp but as soon as that is done I will be...

Hello all-

I am getting into CNC and looking for advice on which computer to run Sheetcam. Should I use it on the desktop which my cnc software will be on or should I use it on my laptop that I...

Is there any way to import a logo, trace tool?, and push/pull it to emboss for a 3d printed ornament? Thanks

- - - Updated - - -

Also I am using Inventor Fusion

I am an MET student and in a bit of a stand still until I get some more math classes out of the way (statics, physics...) because I also work full time so my options are limited due to hours I can be...

I have been doing it for a few months now, only problem I've had with BootCamp is one of my usb ports stopped acknowledging devices.

Hey guys, I have been reading this site for a while now and am looking to start some builds. I have a background in MET but am a very hands on person and really like CNC machines. Thanks