The wood lathe controller have 3 servo drives (by KEB Electronics) one servomotor is located inside the transmission / main motor (Spindle) cabinet, an actuator engages the servomotor to spindle axis...
Type: Posts; User: jardom
The wood lathe controller have 3 servo drives (by KEB Electronics) one servomotor is located inside the transmission / main motor (Spindle) cabinet, an actuator engages the servomotor to spindle axis...
Hi Will, the wood lathe I repaired is still running (with original Motherboard / ISA Boards & Servos), model is AP5000 (~1995), probably the AP7000 have the same controller based on DOS 5 or 6.xx ...
Hello Daniel, I´m repairing an Hapfo AP7000CNC lathe, it runs on Pentium 1 , 133 MHz motherboard, ISA Boards, original software installed is an old DOS 5.0 w/ windows 3.11 workgroups and I´m making...
Hi, I´m repairing a Matsuura MC500V (1983) with Yasnac 3000G Controller (CRT), I´m configuring the parameter # 65 - I (about a memory) but I can´t find if the memory board p/n JANCD-GMR22 has 4 KB or...
Hi, do you still need support for MC500V ?. Do you have an BTR board bypassing the CNC Tape Reader ?
Norman, Compumotor SX series (SXF) can only be programmed via RS232, you can design "sequences" or program subroutines in SX's memory and activate it with PC's parallel output (using the VRD command...