Hello,
I am trying to setup MDF doors with beveled rails. This requires a 3axis movement to square up the corners. I have done this many times before on other CNC's without trouble. However I am...
Type: Posts; User: junglist
Hello,
I am trying to setup MDF doors with beveled rails. This requires a 3axis movement to square up the corners. I have done this many times before on other CNC's without trouble. However I am...
Hello All,
Does anyone know what the following Error means & how to solve it?
Err52 Mach TH mag down cmd- No arrival
If anyone has a manual for the NC400+ control that would also be much...
Hi There,
It is not an Australian machine. There is a label with the following website advancerobotic.ca but it's not active. Doesn't seem like the two companies are connected. I cannot find...
Hello All,
I am trying to output from Enroute to an ART CNC. Please note it's the Canadian version not the Australian! The code is very atypical and I cannot seem to locate any support or...
Hello All.
I used to run a Biesse Rover with an NC400 control. I have been asked to help someone learn how to program it. However it's been a few years and I am a bit rusty. I know back than I...
I am hoping someone can help me with this problem.
I keep getting a PLC44 error when I try to execute a program. I clearly have vacuum pressure as the part is held securely. But the program just...
Is there anyway you could send me the winxiso .exe? This way I can debug this post before l get access to the controller.
Thanks again
Sent from my HUAWEI U8681 using Tapatalk
Thank you. I will look at the file you sent.
So it sounds like my post processor is changing the extension to a .pgm but not converting it to binary.
Thanks for your help.
Sent from my...
235630
Here you go.
If you can covert it to an .xxl that would be great.
Also if you are able to share Winxiso that would be good.
Thanks
Yes.. My post generates a .pgm file l just can't read it at home. I know what the
Xxl file should look like so I want to use winxiso to convert from .pgm to .xxl. Which it can do. Then l can...
Hi All,
I I am trying to generate code for an SCM Routech with Aspire. I have a post processor and it generates the .pgm file I need. The issue is I don't have access to the CNC at the moment...
Hi All,
I I am trying to generate code for an SCM Routech with Aspire. I have a post processor and it generates the .pgm file I need. The issue is I don't have access to the CNC at the moment...
Hi All,
I I am trying to generate code for an SCM Routech with Aspire. I have a post processor and it generates the .pgm file I need. The issue is I don't have access to the CNC at the moment...
I did but it's not the right post.
Sent from my HUAWEI U8681 using Tapatalk
BobCAD version 21
Thanks
Sent from my HUAWEI U8681 using Tapatalk
Hi there. You mentioned having a post for an SCM with Xilog Routolink. Would you be c willing to share it?
Thank you
Richard
Sent from my HUAWEI U8681 using Tapatalk
Hi there.
Is anybody using Solidworks to create Cabinet libraries? I want to create a custom library of cabinets and I am just looking for tips on how to start the process.
Thanks in advance.
...
I have a post for an SCM Routech Record. That has a Xilog controller. If you send me a sample .xxl file I can check if my output matches up with yours.
Richard
Hi There.
Just wondering if anyone is using Solidworks for woodworking. Specifically, store fixture, commercial & residential cabinetry.
If so are there any special plugins or tools you use?
...
Hi All,
I need to create a parametric pocket for a Biesse Rover 23 (with an NC1000 control) that will rough out a rectangular area. I need to be able to adjust the dimensions parameters (fairly...
Hi All,
I need to create a parametric pocket for a Biesse Rover 23 (with an NC1000 control) that will rough out a rectangular area. I need to be able to adjust the dimensions parameters (fairly...
Hi All,
I need to create a parametric pocket for a Biesse Rover 23 (with an NC1000 control) that will rough out a rectangular area. I need to be able to adjust the dimensions parameters (fairly...
Hi,
Just set up a a used SCM Tech 80..
The X & Y axis are moving fine but the Z axis is giving me Follow or Tolerance errors.
I also can't move the Z axis more than 1/4" manually.
Any...
Does anyone have an Enroute post for Xilog Routolink ?? I am using an SCM Tech 80.
Thanks
Richard
Does anyone have a post for Xilog Routolink?
Thanks in advance
What other software do you have ??
Hi,
I tied to recreate the surface I described & had some problems. It will work better if you put another point in the centre of the higer circle now use the join function to draw a line between...
In order to generate the toolpath you need to 1st create a surface. You can do this by clicking on the solids option.
Before you start creating your surface go to the point menu & selct arc...
I'll dig something upn the morning.
Thank you very much for the support..
If you look at page 222 in the manual you will see there is a parameter 64 which can pair the 2 axes together. However this can only be turned on & off manually when a program is not running, unless...